From £22.50 ex VAT - £27.00 inc VAT
Anticorrosive Quick Dry Primer is a single pack priming solution suitable for most metal substrates. Also suitable for pre-treated aluminium and galvanised steel. Anticorrosive Quick Dry Primer gives excellent protection against corrosion. Excellent build levels and can be re-coated in most types of finish.
– Coverage: 5 m² per litre
– Touch Drying Time: 30 mins – 1 hr
– Recoat: 12 hrs
– Hard Drying Time: 24 hrs
Description
BULK ORDERS? CALL 01782 550733 FOR DISCOUNTS!
COLOURS
Red Oxide
Light Grey
Technical Overview
Standard Colours |
Slate Grey and Red Oxide
|
Dry Film Appearance |
Flat
|
Spreading Rate |
5-8m2 per litre (spray application), dependent on film thickness (10m2 @ 50mμ)
|
Touch Dry @20°C |
30 minutes - 1 hour
|
Recoating Time @20°C |
Minimum 12 hours
|
Typical Wet-Film Thickness |
100-150μm per coat
|
Typical Dry-Film Thickness |
50-75μm per coat
|
Solids by Volume |
50% (ASTM D2697) ±3%, dependent on colour
|
VOC Information |
430g per litre (from formula to satisfy EU Solvent Emissions Directive)
|
Application Temperature |
10-35°C
|
Application Method |
Ideally spray; roller or brush for small areas
|
Substrates |
Suitably cleaned and dry surfaces
|
Thinners |
Thinning not recommended. For cleaning, use white spirit.
|
Flash Point |
>25°C
|
Pack Size |
5 litre can; 20 litre can; 205 litre barrel
|
Shelf Life |
12 months
|
Additional information
| Weight | N/A |
|---|---|
| Select Colour | Red Oxide, Light Grey |
| Select Size | 5 Litres, 20 Litres |
Related products
From £39.50 ex VAT - £47.40 inc VAT
Two Pack High Build Epoxy Garage Floor Paint - Designed for application to concrete, cement and non ferrous metals. Excellent resistance to water, solvents, acids, alkalis and salts. Gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
From £22.50 ex VAT - £27.00 inc VAT
Exterior Wood Paint - Exterior Metal Paint - A long oil based decorative gloss finish designed for a wide range of substrates. Ideal for wooden windows/doors, metal fencing/garage doors or concrete walls. This has excellent covering power and provides long lasting weather protection. - Coverage: 5 - 10 m2 per litre - Touch Drying Time: 12hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs
From £23.50 ex VAT - £28.20 inc VAT
Polyurethane Concrete Floor Paint - A single pack high build floor coating giving medium durability against abrasion and impact, with limited protection against solvent, salt and water damage. Polyurethane Concrete Floor Paint is easy to apply with a gloss or semi-gloss finish. Suitable for light commercial and industrial areas.
From £31.00 ex VAT - £37.20 inc VAT
Aluminium Quick Dry Enamel with a tough, quick drying finish. A metal paint made with high grade aluminium flake, rather than pigment, which is dissolved in solvent for 24 hours and diluted with urethan alkyd. Heat resistant up to 150 degrees C. Steel-grey in finish. Typically used to refurbish truck wheels. Advisable to spray. Never use a roller with this product.
From £25.50 ex VAT - £30.60 inc VAT
Quick Dry High Build Floor Paint - A single pack quick dry floor coating which provides good durability against abrasion and impact along with with protection against solvent, salt and water damage. Very easy to apply. Suitable for heavy duty commercial and industrial areas.
From £39.50 ex VAT - £47.40 inc VAT
Two Pack Epoxy Floor Paint (Top Coat) - This epoxy floor coating is designed for application to concrete, cement and non ferrous metals. It provides excellent resistance to water, solvents, acids, alkalis and salts and gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days
From £26.00 ex VAT - £31.20 inc VAT
Plywood Paint / MDF Paint - A tough, long lasting, fast drying gloss finish made on a high build alkyd. High impact resistance, compatible with most primers or as a single coat. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
From £26.50 ex VAT - £31.80 inc VAT
One Coat Gloss Paint - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This one coat paint protects against corrosion and impacts.
From £25.50 ex VAT - £30.60 inc VAT
Quick Drying Gloss Enamel - Enamel Paint - A tough, long lasting, fast drying metal paint with a gloss finish made on a high build alkyd. High impact resistance, compatible with most primers or as a single coat. Can be used for a variety of applications as diverse as machinery paint, skip paint, shipping container paint and tractor paint. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
From £26.00 ex VAT - £31.20 inc VAT
Skip and Container paint - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Using Skip and Container paint eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This protects against corrosion and impacts.
From £25.50 ex VAT - £30.60 inc VAT
Quick Dry Garage Floor Paint - A single pack quick dry floor coating, giving good durability against abrasion and impact with protection against solvent, salt and water damage. Quick Dry Garage Floor Paint is easy to apply with a choice of finishes i.e. gloss/semi/matt. Suitable for heavy duty commercial and industrial areas.
From £33.50 ex VAT - £40.20 inc VAT
Two-Pack Epoxy Metal Primer - Designed for a wide range of metal substrates, our two pack epoxy primer offers excellent durability and resistance to contact with solvents, acids, alkalis and salts. It’s hardwearing surface gives good protection against corrosion due to it’s phosphate content. Two-Pack Epoxy Metal Primer is suitable for galvanised steel and aluminium. - Coverage: 5-10 m² per litre - Touch Drying Time: 12 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
From £29.50 ex VAT - £35.40 inc VAT
Line Marking Paint - A single-pack quick dry high build floor paint which provides very good durability against abrasion and impact along with with protection against solvent, salt and water damage.
From £33.00 ex VAT - £39.60 inc VAT
Milking Parlour Wall Paint - Designed for it’s resistance to moisture and industrial pollution, and is also extremely resistant to chemicals, acids and alkaline. Parlour paint is ideal for areas kept hygienically clean by jet washing and detergents. This is based on a chlorinated rubber, halogenated hydrocarbon resin, giving a semi-gloss finish. - Coverage: 5m² per litre - Touch Drying Time: 6hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs
From £26.50 ex VAT - £31.80 inc VAT
One Coat High Build Steel Enamel - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This protects against corrosion and impacts. - Coverage: 5-10 m2 per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
From £25.50 ex VAT - £30.60 inc VAT
High Build Phosphate Quick Dry Primer is a single pack priming solution suitable for most metal substrates. This metal paint is also suitable for pre-treated aluminium and galvanised steel. High Build Phosphate Quick Dry Primer gives excellent protection against corrosion. Excellent build levels and can be re-coated in most types of finish. - Coverage: 5 m² per litre - Touch Drying Time: 30 mins - 1 hr - Recoat: 12 hrs - Hard Drying Time: 24 hrs