Two Pack Epoxy Floor Paint (Top Coat) - This epoxy floor coating is designed for application to concrete, cement and non ferrous metals. It provides excellent resistance to water, solvents, acids, alkalis and salts and gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days
Two Pack Epoxy Floor Paint Bundle 20 Litres - The two pack epoxy floor bundle is designed for heavy use commercial industrial areas or on flooring areas that require a low maintenance long lasting finish. The key advantages over a single pack product are greater resistance to impact and abrasion, also a much greater protection from chemical, acid and alkalis spills. A single pack floor paint may require annual maintenance to ensure high wear points don't erode however epoxy coatings should last for a number of years. Bundle includes 3 x 20 litre products: 1 x 20 lts Two-Pack Epoxy Floor Sealer 1 x 20 lts Two-Pack Epoxy Floor Paint Top Coat 1 x 20 lts Regal Clear Finish
Two Pack Epoxy Floor Paint Bundle 5 Litres - The two pack epoxy floor bundle is designed for heavy use commercial industrial areas or on flooring areas that require a low maintenance long lasting finish. The key advantages over a single pack product are greater resistance to impact and abrasion, also a much greater protection from chemical, acid and alkalis spills. A single pack floor paint may require annual maintenance to ensure high wear points don't erode however epoxy coatings should last for a number of years. Bundle includes 3 x 5 litre products: 1 x 5 lts two pack epoxy floor sealer 1 x 5 lts two pack epoxy floor paint top coat 1 x 5 lts Regal Clear Finish
Two-Pack Epoxy Floor Sealer (Under Coat) - This epoxy floor paint (first coat) is designed to prepare the surface of concrete, cement and non ferrous metals. This gives an ideal base for epoxy topcoat or acts as a seal coat for bare concrete floors. Resistant to water, solvents, acids, alkalis and salts. Tough finish, and has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
A two-Pack (or two-part) epoxy paint for metal, a topcoat enamel which is designed to be used in conjunction with Regal epoxy primer for application to most metal substrates. This epoxy metal paint has excellent durability and impact resistance. Offers protection from solvents, acids, alkalis and salts. - Coverage: 5-10 m² per litre - Touch Drying Time: 12 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days
Two-Pack Epoxy Metal Primer - Designed for a wide range of metal substrates, our two pack epoxy primer offers excellent durability and resistance to contact with solvents, acids, alkalis and salts. It’s hardwearing surface gives good protection against corrosion due to it’s phosphate content. Two-Pack Epoxy Metal Primer is suitable for galvanised steel and aluminium. - Coverage: 5-10 m² per litre - Touch Drying Time: 12 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
Two Pack High Build Epoxy Garage Floor Paint - Designed for application to concrete, cement and non ferrous metals. Excellent resistance to water, solvents, acids, alkalis and salts. Gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle / trucks). - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
Our White Masonry Paint is a water borne (water based) masonry paint with a smooth sheen finish. Based on acrylic resin. Excellent covering power with long lasting protection to exterior walls, guarding against weather damage. Can also be used to paint internal brick and concrete walls of industrial units, factories etc. Sold in 20 litre cans and also available in Magnolia. Bespoke colours can be made for orders over 200 litres. Please contact us for more details.
Regal Clear Finish is ideal as a finishing coat over our epoxy or single pack floor paints to enhance gloss levels. A 2-pack acrylic which is fast drying and has excellent hardness. To be applied very thinly.
Floor Primer made to use in conjunction with any of the Regal single pack topcoat floor paints. Not suitable for use with our epoxy topcoat floor paint. Regal Prime and Seal is a single pack, quick drying, low viscosity, penetrating first-coat floor primer. Designed to soak into the substrate, it enhances adhesion of subsequent top coats by acting as an anchor layer between the substrate and floor paint. Regal Prime and Seal dries with a flat finish. The colour is non specific. - Coverage: 5-10 m² per litre - Touch Drying Time: 2-4 hours - Recoat: 24 hours - Hard Drying Time: 24 hours You might be thinking does floor paint need primer? Please read our information page 'what does floor primer do?'.
Clean n Etch - This acid etch product is made for very smooth / power floated floors or dirty floors. Clean n Etch is a highly concentrated blend of non-fuming acidic compounds and cleaning agents, specifically developed to prepare concrete floors prior to applying paints and other protective coatings.
Pack includes: 1 x Clean n Etch 1 x 15" Roller Frame 1 x 15" Roller Head 2 x 4" brushes 1 x mixer paddle This is the basic starter pack for painting a floor. It contains all the tools you will need to get the job done. Clean n Etch Bundles - floor preparation and paint application.
Pumice aggregate is an extremely lightweight natural material which is mixed into the paint prior to application. It gives a rough-profiled finish and significantly increases slip resistance. When using, pour the pumice into the paint and mix thoroughly. After mixing, use the paint immediately. Apply the paint with a roller to achieve a consistent finish. A natural stone alternative to plastic microbeads.
A heavy duty, low odour degreasing detergent. Specially formulated for the removal of grease, oils, fats and stubborn deposits from floors, walls, machinery, paintwork and other hard surfaces. Ideal for preparing your floor ready for a first coat. Used by floor contractors to clean concrete prior to painting. Suitable for the engineering industry, food handling sector, offices, shops, hotels and many other areas where regular cleaning is required. A biodegradable, low caustic, low odour, non-solvent cleaner. It can also be used as an ongoing maintenance product to remove foot and tyre marks from painted floors.
SuperTough Aggregate is an iron-silicate grit. With much larger particles than our Pumice Aggregate, it has a hard, sharp finish to give fantastic grip when used in conjunction with our floor paints. To use SuperTough Aggregate, firstly apply a coat of floor paint and then liberally scatter the grit over the surface of the wet paint. Allow the floor to dry for a full 24 hours. Once dry, use a soft brush to remove the excess SuperTough Aggregate that hasn’t stuck. Then paint over the whole surface of the floor again to seal the grit in place on the floor.