Customer Projects, Monthly Competition
Gudentight – Epoxy Floor Paint Project
Jan
The Gudentight hand-made Viking shields company paint their Workshop Floor with Two-Pack Epoxy Floor Paint
Congratulations to the winner of our December #showusyourproject competition – our Instagram entry from @gudentight!
They used our two-pack epoxy floor paint system to paint their workshop floor, which we think looks great. The two-pack epoxy floor-sealer coat was applied over bare concrete. After leaving this to dry, the blue topcoat was applied using rollers and you can see how stunning the colour looks; and is perfect for their workshop.
“We finally put the primer on the floor ready for the paint, I have to say @regalpaintuk make some fantastic paints, it went down very easily and we look forward to putting the colour down tomorrow”
“We are really impressed by the paints that @regalpaintuk make, they are easy to use with a 3 hour working time and go down easily.”
Two Pack Epoxy Floor Paint (Top Coat) - This epoxy floor coating is designed for application to concrete, cement and non ferrous metals. It provides excellent resistance to water, solvents, acids, alkalis and salts and gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days
Two-Pack Epoxy Floor Sealer (Under Coat) - This epoxy floor paint (first coat) is designed to prepare the surface of concrete, cement and non ferrous metals. This gives an ideal base for epoxy topcoat or acts as a seal coat for bare concrete floors. Resistant to water, solvents, acids, alkalis and salts. Tough finish, and has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
@gudentight hand-make Viking shields and if you follow the link to their Instagram page, you can take a look at their workshop project and the shields that they make. All small businesses are really looking for support at the moment, as we all battle through the current lockdown, so I’m sure that @gudentight would appreciate any new follows of their page.
Our two-pack epoxy floor paint is the most hard-wearing paint. If you need any help or advice in choosing suitable floor paints, please don’t hesitate to call us on 01782 550733.
Would you like to be in with the chance of winning a £50 Amazon eVoucher?
Would you like to be in with the chance of winning a £50 Amazon eVoucher? Why don’t you enter our January #showusyourproject competition? We love to see how our customers are using Regal products and, no matter how big or small your project, we welcome all entries!
Simply send us a few words about your project and the paint that you used, along with photographs* to sales@regalpaints.co.uk. Or if you are social media savvy, why not tag us on Facebook @regalpaintuk or Instagram @regalpaintuk (hashtag #regalpaintuk)?