BULK ORDERS? CALL 01782 550733 FOR DISCOUNTS!
COLOURS
Light Grey
Red Oxide
Black
White
Standard Colours |
Light Grey and Red Oxide
|
Dry Film Appearance |
Matt finish
|
Substrates |
Steel SA2.5 / ST2
|
Components |
2 (Resin and Hardener/Activator)
|
Curing Mechanism |
Solvent release and chemical reaction between components
|
Mixing Ratio (by Volume) |
Resin 4 parts: Hardener/Activator 1 part
|
Induction Time |
10 minutes (at 20°C)
|
Pot Life |
4 hours at 20°C (pot life is dependent on temperature and quantities mixed)
|
Spreading Rate |
5 per litre at 125μm (allow for application losses, surface irregularities etc)
|
Touch Dry @20°C |
12-16 hours
|
Recoating Time @20°C |
24 hours
|
Hard-Drying Time |
48 hours
|
Full Cure |
7 days
|
Typical Wet-Film Thickness |
180μm per coat
|
Typical Dry-Film Thickness |
125μm per coat
|
Solids by Volume |
63% (ASTM D2697) ±3%, dependent on colour
|
VOC Information |
22% by weight (190g/kg)
|
Specific Gravity |
1.68 kg per litre (mixed product)
|
Application Temperature |
Minimum 5°C
|
Application Method |
Airless spray, conventional spray, brush (for small areas)
|
Thinners |
Xylene
|
Flash Point |
Resin 25°C; Hardener/Activator 25°C (Closed Cup)
|
Pack Size |
5 litres (Resin 4 litres: Hardener/Activator 1 litre); 20 litres (Resin 16 litres: Hardener/Activator 4 litres)
|
Shelf Life |
12 months (when stored indoors, unopened, in the original containers at 5-30°C)
|