£32.50 ex VAT
Spiked Shoes (SPIKEDSHOES)
Nylon Nail Shoes 1 Pair suitable for up to Shoe size 10
Strong webbing with metal buckles to secure
40mm Nail protrudes 30mm from bottom of shoe
Ideal for use in walking over flooring adhesive and Resin coatings.
WE AIM TO DISPATCH ORDERS WITHIN 24 HOURS (STOCK DEPENDENT)
ALL ORDERS SENT ON A NEXT WORKING-DAY SERVICE
FREE DELIVERY ON ALL ORDERS OVER £200*
*£200 NET. Excludes surcharge areas - delivery surcharge will still apply.
Ordering in Northern Ireland? Why not try our approved distribution partner?
Auto Supplies Newry Ltd.
40 Kilmorey St, Newry
Tel: 028 3026 5131
Black-Stripe Nylon material is heat-bonded to the nylon core in manufacture. Ideal for painting floors, the nylon core is solvent resistant and the Nylon fabric is virtually fluff-free in use. This makes this type of roller refill ideal for use with epoxy resin floor paint and other solvent based coatings that would pull fluff from or disolve most other roller refills. Available in four sizes: 9", 12", 15" & 18" wide.
Pumice aggregate is an extremely light aggregate which has the advantage of being able to mix into the paint prior to application. It is a non-microbead solution to a fine, aggregated finish. Pumice gives a rough-profiled finish and significantly increase slip resistance. When using, pour the pumice into the paint and mix thoroughly. After mixing, use the paint immediately. The paint must be applied with a roller to achieve a consistent finish.
SuperTough Aggregate is an iron-silicate grit. It has good shatter resistance and has a hard, sharp finish to give fantastic grip. To use SuperTough Aggregate on a previously-painted floor, apply a coat of floor paint and then liberally scatter the grit over the surface of the wet paint. Allow the floor to dry for a full 24 hours. Once dry, remove the excess SuperTough Aggregate that hasn’t stuck with a soft brush. Then the paint over the whole surface of the floor again to seal the grit in place on the floor.