Click on the product you require more information on to navigate to the relevant data sheets, MSDS information and detailed technical specifications.

PRODUCT NAME

Agricultural Oxide

ProdUCT DATA SHEET

DOWNLOAD

SAFETY DATA SHEET

DOWNLOAD
Agricultural Oxide Data Sheet

Standard Colours

Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White.

*Other RAL and British Standard colours can be made, dependent on the quantities required.

Dry Film Appearance

Gloss finish

Spreading Rate

5m2 per litre, dependent on film thickness.

Touch Dry @20°C

6 hours

Recoating Time @20°C

Minimum 18 hours

Typical Wet-Film Thickness

30-50μm per coat

Typical Dry-Film Thickness

20-30μm per coat

Solids by Volume

62%

VOC Information

295g per litre (from formula to satisfy EU Solvent Emissions Directive)

Application Temperature

6-35°C

Application Method

Spray, brush or roller

Substrates

Suitably cleaned and dry surfaces. Most interior or exterior substrate, especially metal agricultural buildings and structural steel. Can also be applied to asbestos, wood and steel sheets.

Thinners

Standard Thinner

Flash Point

≥32°C

Pack Size

5 litre can; 20 litre can; 205 litre barrel

Shelf Life

12 months

Back to Top

PRODUCT NAME

Aluminium Quick Dry Enamel

PRODUCT DATA SHEET

DOWNLOAD

SAFETY DATA SHEET

DOWNLOAD
Aluminium Quick Dry Enamel

Standard Colours

Aluminium

Dry Film Appearance

Sheen finish (50-60% gloss)

Spreading Rate

6.5m2 per litre @75μm.

Touch Dry @20°C

1-2 hours

Recoating Time @20°C

Minimum 16 hours

Typical Wet-Film Thickness

50-150μm per coat

Typical Dry-Film Thickness

25-75μm per coat

Solids by Volume

50% (ASTM D2697)

VOC Information

468g per litre

Application Temperature

10-35°C

Application Method

Airless spray, air-assisted spray (15-17 thou tip) brush or roller

Substrates

Suitably cleaned and dry surfaces. Steel and non-ferrous metal.

Thinners

Xylene

Flash Point

≥25°C

Pack Size

5 litre can; 20 litre can; 205 litre barrel

Shelf Life

12 months
Back to Top

PRODUCT NAME

Anticorrosive Quick Dry Primer

PRODUCT DATA SHEET

DOWNLOAD

SAFETY DATA SHEET

DOWNLOAD
Anticorrosive Quick Dry Primer

Standard Colours

Slate Grey and Red Oxide

Dry Film Appearance

Flat

Spreading Rate

5-8m2 per litre (spray application), dependent on film thickness (10m2 @ 50mμ)

Touch Dry @20°C

30 minutes - 1 hour

Recoating Time @20°C

Minimum 12 hours

Typical Wet-Film Thickness

100-150μm per coat

Typical Dry-Film Thickness

50-75μm per coat

Solids by Volume

50% (ASTM D2697) ±3%, dependent on colour

VOC Information

430g per litre (from formula to satisfy EU Solvent Emissions Directive)

Application Temperature

10-35°C

Application Method

Ideally spray; roller or brush for small areas

Substrates

Suitably cleaned and dry surfaces

Thinners

Thinning not recommended. For cleaning, use white spirit.

Flash Point

>25°C

Pack Size

5 litre can; 20 litre can; 205 litre barrel

Shelf Life

12 months
Back to Top

PRODUCT NAME

Antislip Quick Dry Concrete Floor Paint

PRODUCT DATA SHEET

DOWNLOAD

SAFETY DATA SHEET

DOWNLOAD
Anti Slip Quick Dry Concrete Paint

Standard Colours

Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White. *Other RAL and British Standard colours can be made, dependent on the quantities required.

Dry Film Appearance

Sheen, textured

Spreading Rate

5-8m2 per litre, dependent on film thickness

Touch Dry @20°C

3-4 hours

Recoating Time @20°C

Minimum 24 hours

Typical Wet-Film Thickness

105-170μm per coat

Typical Dry-Film Thickness

60-95μm per coat

Solids by Volume

58% (ASTM D2697) ±3%, dependent on colour

VOC Information

420g per litre (from formula to satisfy EU Solvent Emissions Directive)

Application Temperature

10-35°C

Application Method

Brush or roller

Substrates

Suitably cleaned and dry surfaces

Thinners

Thinning not recommended. For cleaning, use standard thinners.

Flash Point

>25°C

Pack Size

5 litre can; 20 litre can; 205 litre barrel

Shelf Life

12 months
Back to Top

PRODUCT NAME

Decorative Gloss

PRODUCT DATA SHEET

DOWNLOAD

SAFETY DATA SHEET

DOWNLOAD
Decorative Gloss

Standard Colours

Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White. *Other RAL and British Standard colours can be made, dependent on the quantities required.

Dry Film Appearance

Gloss finish

Spreading Rate

7-15m2 per litre; 10m2@50μm

Touch Dry @20°C

6-8 hours

Recoating Time @20°C

Minimum 16 hours (overnight recommended)

Typical Wet-Film Thickness

60-80μm per coat

Typical Dry-Film Thickness

30-40μm per coat

Solids by Volume

40% (ASTM D2697) ±3%, dependent on colour

VOC Information

470g per litre

Application Temperature

10-35°C

Application Method

Brush, roller or spray

Substrates

Suitably cleaned and dry surfaces.

Thinners

Thinning not recommended. For cleaning, use white spirit.

Flash Point

≥38°C

Pack Size

5 litre can; 20 litre can; 205 litre barrel

Shelf Life

12 months
Back to Top

PRODUCT NAME

Clean and Degrease

SAFETY DATA SHEET

DOWNLOAD
Back to Top

PRODUCT NAME

Clean n Etch

SAFETY DATA SHEET

DOWNLOAD
Back to Top

PRODUCT DATA

Highbuild Phosphate Quick Dry Primer

PRODUCT DATA SHEET

DOWNLOAD

SAFETY DATA SHEET

DOWNLOAD
Highbuild Phosphate Quick Dry Primer
Back to Top

PRODUCT NAME

Line Marking Paint

PRODUCT DATA SHEET

DOWNLOAD

SAFETY DATA SHEET

DOWNLOAD
Line Marking Paint

Standard Colours

Post Office Red, JCB Yellow, Bright Orange, Black, White. *Other RAL and British Standard colours can be made, dependent on the quantities required.

Dry Film Appearance

Semi-gloss

Spreading Rate

5-8m2 per litre, dependent on film thickness (10m2 @ 50mμ; 5m2 @ 100μ)

Touch Dry @20°C

3-4 hours

Recoating Time @20°C

Minimum 24 hours

Typical Wet-Film Thickness

85-135μm per coat

Typical Dry-Film Thickness

50-100μm per coat

Solids by Volume

58% (ASTM D2697) ±3%, dependent on colour

VOC Information

420g per litre (from formula to satisfy EU Solvent Emissions Directive)

Application Temperature

10-35°C

Application Method

Brush or roller

Substrates

Suitably cleaned and dry surfaces

Thinners

Thinning not recommended. For cleaning, use standard thinners.

Flash Point

>25°C

Pack Size

5 litre can; 20 litre can; 205 litre barrel

Shelf Life

12 months
Back to Top

PRODUCT NAME

Masonry Paint

PRODUCT DATA SHEET

DOWNLOAD

SAFETY DATA SHEET

DOWNLOAD
Back to Top

PRODUCT NAME

Onecoat High Build Steel Enamel

PRODUCT DATA SHEET

DOWNLOAD

SAFETY DATA SHEET

DOWNLOAD
One Coat High Build Steel Enamel

Standard Colours

Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White.

Dry Film Appearance

Gloss

Spreading Rate

5-10m2 per litre

Touch Dry @20°C

3-6 hours

Recoating Time @20°C

Minimum 16 hours

Typical Wet-Film Thickness

100-150μm per coat

Typical Dry-Film Thickness

50-75μm per coat

Solids by Volume

50% (ASTM D2697)

VOC Information

430g per litre

Application Temperature

10-35°C

Application Method

Airless spray, air-assisted spray (15-17 thou tip) brush or roller

Substrates

Suitably cleaned and dry surfaces

Thinners

Thinning not recommended. For cleaning, use standard thinners.

Flash Point

≥25°C

Pack Size

5 litre can; 20 litre can; 205 litre barrel

Shelf Life

12 months
Back to Top

PRODUCT NAME

Parlour Paint

PRODUCT DATA SHEET

DOWNLOAD

SAFETY DATA SHEET

DOWNLOAD
Parlour Paint

Standard Colours

Slate Grey, Light Grey, Cornflower Blue, White. *Other RAL and British Standard colours can be made, dependent on the quantities required.

Dry Film Appearance

Semi-gloss finish

Spreading Rate

4-6m2 per litre, depending on surface profile

Touch Dry @20°C

1-2 hours

Recoating Time @20°C

8-10 hours

Typical Wet-Film Thickness

150-200μm per coat

Typical Dry-Film Thickness

75-100μm per coat

Solids by Volume

52% (ASTM D2697) ±3%, dependent on colour

VOC Information

412g per litre

Application Temperature

6-35°C

Application Method

Brush or roller

Substrates

Suitably cleaned and dry surfaces

Thinners

Thinning not recommended. For cleaning, use standard thinners.

Flash Point

≥25°C

Pack Size

5 litre can; 20 litre can; 205 litre barrel

Shelf Life

12 months
Back to Top

PRODUCT NAME

Plywood Paint / MDF Paint

PRODUCT DATA SHEET

DOWNLOAD

SAFETY DATA SHEET

DOWNLOAD
Plywood Paint Data Sheet

Standard Colours

Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White. *Other RAL and British Standard colours can be made, dependent on the quantities required.

Dry Film Appearance

Sheen, textured

Spreading Rate

5-8m2 per litre, dependent on film thickness

Touch Dry @20°C

3-4 hours

Recoating Time @20°C

Minimum 24 hours

Typical Wet-Film Thickness

105-170μm per coat

Typical Dry-Film Thickness

60-95μm per coat

Solids by Volume

58% (ASTM D2697) ±3%, dependent on colour

VOC Information

420g per litre (from formula to satisfy EU Solvent Emissions Directive)

Application Temperature

10-35°C

Application Method

Brush or roller

Substrates

Suitably cleaned and dry surfaces

Thinners

Thinning not recommended. For cleaning, use standard thinners.

Flash Point

>25°C

Pack Size

5 litre can; 20 litre can; 205 litre barrel

Shelf Life

12 months
Back to Top

PRODUCT NAME

Polyurethane Concrete Floor Paint

PRODUCT DATA SHEET

DOWNLOAD

SAFETY DATA SHEET

DOWNLOAD
Polyurethane Concrete Floor Paint

Standard Colours

Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White. *Other RAL and British Standard colours can be made, dependent on the quantities required.

Dry Film Appearance

Semi-gloss

Spreading Rate

5-7m2 per litre, dependent on film thickness

Touch Dry @20°C

8 hours

Recoating Time @20°C

Minimum 24 hours

Typical Wet-Film Thickness

85-145μm per coat

Typical Dry-Film Thickness

50-100μm per coat

Solids by Volume

55% (ASTM D2697) +/-3%, dependent on colour

VOC Information

430g per litre (from formula to satisfy EU Solvent Emissions Directive)

Application Temperature

10-35°C

Application Method

Brush or roller

Substrates

Suitably cleaned and dry surfaces

Thinners

Thinning not recommended. For cleaning, use white spirit.

Flash Point

+32°C

Pack Size

5 litre can; 20 litre can; 205 litre barrel

Shelf Life

12 months
Back to Top

PRODUCT NAME

Quick Dry Garage Floor Paint

PRODUCT DATA SHEET

DOWNLOAD

SAFETY DATA SHEET

DOWNLOAD
Quick Dry Garage Floor Paint

Standard Colours

Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White. *Other RAL and British Standard colours can be made, dependent on the quantities required.

Dry Film Appearance

Semi-gloss

Spreading Rate

5m2 per litre, dependent on film thickness (10m2 @ 50mμ; 5m2 @ 100μ)

Touch Dry @20°C

3-4 hours

Recoating Time @20°C

Minimum 24 hours

Typical Wet-Film Thickness

85-135μm per coat

Typical Dry-Film Thickness

50-100μm per coat

Solids by Volume

58% (ASTM D2697) ±3%, dependent on colour

VOC Information

420g per litre (from formula to satisfy EU Solvent Emissions Directive)

Application Temperature

10-35°C

Application Method

Brush or roller

Substrates

Suitably cleaned and dry surfaces

Thinners

Thinning not recommended. For cleaning, use standard thinners.

Flash Point

>25°C

Pack Size

5 litre can; 20 litre can; 205 litre barrel

Shelf Life

12 months
Back to Top

PRODUCT NAME

Quick Dry High Build Floor Paint

PRODUCT DATA SHEET

DOWNLOAD

SAFETY DATA SHEET

DOWNLOAD
Quick Dry High Build Floor Paint

Standard Colours

Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White. *Other RAL and British Standard colours can be made, dependent on the quantities required.

Dry Film Appearance

Semi-gloss (60-70%)

Spreading Rate

5-8m2 per litre, dependent on film thickness (10m2 @ 50mμ; 5m2 @ 100μ)

Touch Dry @20°C

3-4 hours

Recoating Time @20°C

Minimum 24 hours

Typical Wet-Film Thickness

105-195μm per coat

Typical Dry-Film Thickness

85-110μm per coat

Solids by Volume

60% (ASTM D2697) ±3%, dependent on colour

VOC Information

420g per litre (from formula to satisfy EU Solvent Emissions Directive)

Application Temperature

10-35°C

Application Method

Brush or roller

Substrates

Suitably cleaned and dry surfaces

Thinners

Thinning not recommended. For cleaning, use standard thinners.

Flash Point

>25°C

Pack Size

5 litre can; 20 litre can; 205 litre barrel

Shelf Life

12 months
Back to Top

PRODUCT NAME

Quick Drying Gloss Enamel (Topcoat)

PRODUCT DATA SHEET

DOWNLOAD

SAFETY DATA SHEET

DOWNLOAD
Quick Drying Gloss Enamel

Standard Colours

Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White. *Other RAL and British Standard colours can be made, dependent on the quantities required.

Dry Film Appearance

Sheen, textured

Spreading Rate

5-8m2 per litre, dependent on film thickness

Touch Dry @20°C

3-4 hours

Recoating Time @20°C

Minimum 24 hours

Typical Wet-Film Thickness

105-170μm per coat

Typical Dry-Film Thickness

60-95μm per coat

Solids by Volume

58% (ASTM D2697) ±3%, dependent on colour

VOC Information

420g per litre (from formula to satisfy EU Solvent Emissions Directive)

Application Temperature

10-35°C

Application Method

Brush or roller

Substrates

Suitably cleaned and dry surfaces

Thinners

Thinning not recommended. For cleaning, use standard thinners.

Flash Point

>25°C

Pack Size

5 litre can; 20 litre can; 205 litre barrel

Shelf Life

12 months
Back to Top

PRODUCT NAME

Regal Clear Finish

PRODUCT DATA SHEET

DOWNLOAD
Regal Clear Finish

Standard Colours

None. This product is clear.

Dry Film Appearance

High Gloss

Spreading Rate

10m2 per litre

Touch Dry @20°C

1-2 hours

Recoating Time @20°C

12 hours

Typical Wet-Film Thickness

45-75μm per coat

Typical Dry-Film Thickness

25-40μm per coat

Solids by Volume

48% (ASTM D2697) ±3%, dependent on colour

VOC Information

430g per litre

Application Temperature

10-35°C

Application Method

Brush or roller

Substrates

Suitably cleaned and dry surfaces

Thinners

Xylene

Flash Point

≥25°C

Pack Size

5 litre can; 20 litre can

Shelf Life

12 months

Back to Top

PRODUCT NAME

Regal Prime and Seal

PRODUCT DATA SHEET

DOWNLOAD

SAFETY DATA SHEET

DOWNLOAD
Regal Prime and Shield

Standard Colours

Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White. *Other RAL and British Standard colours can be made, dependent on the quantities required.

Dry Film Appearance

Matt

Spreading Rate

5.5-8m2 per litre

Touch Dry @20°C

15-30 minutes

Recoating Time @20°C

14 hours

Typical Wet-Film Thickness

120-160μm per coat

Typical Dry-Film Thickness

65-90μm per coat

Solids by Volume

56% (ASTM D2697) ±3%, dependent on colour

VOC Information

430g per litre

Application Temperature

10-35°C

Application Method

Brush or roller

Substrates

Suitably cleaned and dry surfaces

Thinners

Xylene

Flash Point

≥25°C

Pack Size

5 litre can; 20 litre can; 205 litre barrel

Shelf Life

12 months
Back to Top

PRODUCT NAME

Skip Paint

PRODUCT DATA SHEET

DOWNLOAD

SAFETY DATA SHEET

DOWNLOAD
Skip Paint

Standard Colours

Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White. *Other RAL and British Standard colours can be made, dependent on the quantities required.

Dry Film Appearance

Semi-gloss finish

Spreading Rate

5.5-8m2 per litre

Touch Dry @20°C

15-30 minutes

Recoating Time @20°C

1 hour

Typical Wet-Film Thickness

120-160μm per coat

Typical Dry-Film Thickness

65-90μm per coat

Solids by Volume

56% (ASTM D2697) ±3%, dependent on colour

VOC Information

430g per litre

Application Temperature

10-35°C

Application Method

Airless spray (15-17 thou tip), airless spray, brush or roller

Substrates

Suitably cleaned and dry surfaces

Thinners

Xylene

Flash Point

≥25°C

Pack Size

5 litre can; 20 litre can; 205 litre barrel

Shelf Life

12 months
Back to Top

PRODUCT NAME

Two Pack Epoxy Floor Paint (Top Coat)

PRODUCT DATA SHEET

DOWNLOAD
Two pack epoxy floor paint top coat

Standard Colours

Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White. *Other RAL and British Standard colours can be made, dependent on the quantities required.

Dry Film Appearance

Sheen

Substrates

Concrete and non-ferrous metals

Components

2 (Resin and Hardener/Activator)

Curing Mechanism

Solvent release and chemical reaction between components

Mixing Ratio (by Volume)

Resin 4 parts: Hardener/Activator 1 part

Induction Time

10 minutes (at 20°C)

Pot Life

3 hours at 20°C (pot life is dependent on temperature and quantities mixed)

Spreading Rate

5-7m2 per litre at 125μm (allow for application losses, surface irregularities etc.)

Touch Dry @20°C

12-16 hours

Recoating Time @20°C

24 hours

Hard-Drying Time

48 hours

Full Cure

7 days

Typical Wet-Film Thickness

230μm per coat

Typical Dry-Film Thickness

150μm per coat

Solids by Volume

63% (ASTM D2697) ±3%, dependent on colour

VOC Information

22% by weight (190g/kg)

Specific Gravity

1.68 kg per litre (mixed product)

Application Temperature

Minimum 5°C

Application Method

Roller or brush

Thinners

Standard Thinner

Flash Point

Resin 36°C; Hardener/Activator 33°C (Closed Cup)

Pack Size

5 litres (Resin 4 litres: Hardener/Activator 1 litre); 20 litres (Resin 16 litres: Hardener/Activator 4 litres)

Shelf Life

12 months (when stored indoors, unopened, in the original containers at 5-30°C)
Back to Top

PRODUCT NAME

Two Pack Epoxy Floor Sealer (Under Coat)

PRODUCT DATA SHEET

DOWNLOAD
Two Pack Epoxy Floor Sealer

Dry Film Appearance

Matt finish

Substrates

Concrete and non-ferrous metals

Components

2 (Resin and Hardener/Activator)

Curing Mechanism

Solvent release and chemical reaction between components

Mixing Ratio (by Volume)

Resin 4 parts: Hardener/Activator 1 part

Induction Time

10 minutes (at 20°C)

Pot Life

3 hours at 20°C (pot life is dependent on temperature and quantities mixed)

Spreading Rate

5-7m2 per litre at 125μm

Touch Dry @20°C

12-16 hours

Recoating Time @20°C

24 hours

Hard-Drying Time

48 hours

Full Cure

7 days

Typical Wet-Film Thickness

180μm per coat

Typical Dry-Film Thickness

125μm per coat

Solids by Volume

63% (ASTM D2697) ±3%, dependent on colour

VOC Information

22% by weight (190g/kg)

Specific Gravity

1.68 kg per litre (mixed product)

Application Temperature

Minimum 5°C

Application Method

Airless spray, conventional spray, roller or brush

Thinners

Standard Thinner

Flash Point

Resin 36°C; Hardener/Activator 33°C (Closed Cup)

Pack Size

5 litres (Resin 4 litres: Hardener/Activator 1 litre); 20 litres (Resin 16 litres: Hardener/Activator 4 litres)

Shelf Life

12 months (when stored indoors, unopened, in the original containers at 5-30°C)
Back to Top

PRODUCT NAME

Two Pack Epoxy Metal Primer

PRODUCT DATA SHEET

DOWNLOAD
two pack epoxy metal primer

Standard Colours

Light Grey and Red Oxide

Dry Film Appearance

Matt finish

Substrates

Steel SA2.5 / ST2

Components

2 (Resin and Hardener/Activator)

Curing Mechanism

Solvent release and chemical reaction between components

Mixing Ratio (by Volume)

Resin 4 parts: Hardener/Activator 1 part

Induction Time

10 minutes (at 20°C)

Pot Life

4 hours at 20°C (pot life is dependent on temperature and quantities mixed)

Spreading Rate

5 per litre at 125μm (allow for application losses, surface irregularities etc)

Touch Dry @20°C

12-16 hours

Recoating Time @20°C

24 hours

Hard-Drying Time

48 hours

Full Cure

7 days

Typical Wet-Film Thickness

180μm per coat

Typical Dry-Film Thickness

125μm per coat

Solids by Volume

63% (ASTM D2697) ±3%, dependent on colour

VOC Information

22% by weight (190g/kg)

Specific Gravity

1.68 kg per litre (mixed product)

Application Temperature

Minimum 5°C

Application Method

Airless spray, conventional spray, brush (for small areas)

Thinners

Xylene

Flash Point

Resin 25°C; Hardener/Activator 25°C (Closed Cup)

Pack Size

5 litres (Resin 4 litres: Hardener/Activator 1 litre); 20 litres (Resin 16 litres: Hardener/Activator 4 litres)

Shelf Life

12 months (when stored indoors, unopened, in the original containers at 5-30°C)
Back to Top

PRODUCT NAME

Two Pack Epoxy High Build Garage Floor Paint

PRODUCT DATA SHEET

DOWNLOAD
2-Pack Epoxy High Build Garage Floor Paint

Standard Colours

Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White. Other RAL and British Standard colours can be made, dependent on the quantities required.

Dry Film Appearance

Sheen

Substrates

Concrete and non-ferrous metals

Components

2 (Resin and Hardener/Activator)

Curing Mechanism

Solvent release and chemical reaction between components

Mixing Ratio (by Volume)

Resin 4 parts: Hardener/Activator 1 part

Induction Time

10 minutes (at 20°C)

Pot Life

3 hours at 20°C (pot life is dependent on temperature and quantities mixed)

Spreading Rate

5-7m2 per litre at 125μm (allow for application losses, surface irregularities etc.)

Touch Dry @20°C

12-16 hours

Recoating Time @20°C

24 hours

Hard-Drying Time

48 hours

Full Cure

7 days

Typical Wet-Film Thickness

230μm per coat

Typical Dry-Film Thickness

150μm per coat

Solids by Volume

63% (ASTM D2697) ±3%, dependent on colour

VOC Information

22% by weight (190g/kg)

Specific Gravity

1.68 kg per litre (mixed product)

Application Temperature

Minimum 5°C

Application Method

Roller (or brush for small areas)

Thinners

Standard Thinner

Flash Point

Resin 36°C; Hardener/Activator 33°C (Closed Cup)

Pack Size

5 litres (Resin 4 litres: Hardener/Activator 1 litre); 20 litres (Resin 16 litres: Hardener/Activator 4 litres)

Shelf Life

12 months (when stored indoors, unopened, in the original containers at 5-30°C)
Back to Top