Showing all 8 results

Tools and Extras

From £0.50 ex VAT - £0.60 inc VAT

Plain Wooden Handled Paint Brushes in sizes 1/2", 1", 2", 3"& 4" Ideal for work with resins as handle will not react with solvent based products.

From £5.30 ex VAT - £6.36 inc VAT

Black-Stripe Nylon material is heat-bonded to the nylon core in manufacture. The Nylon core is solvent resistant and the Nylon fabric is virtually fluff-free in use. This makes this type of roller refill ideal for use with Epoxy Resins and other solvent based coatings that would pull fluff from or disolve most other roller refills. Available in 9", 12", 15" & 18" wide. Other sizes available on request.

£8.50 ex VAT

Paint Mixer - Ideal for mixing paint, adhesives, grout, mortar, cement and most liquid materials. Ensure the paint mixer is fully immersed in the liquid before use.

£32.50 ex VAT

Spiked Shoes (SPIKEDSHOES) Nylon Nail Shoes 1 Pair suitable for up to Shoe size 10 Strong webbing with metal buckles to secure 40mm Nail protrudes 30mm from bottom of shoe Ideal for use in walking over flooring adhesive and Resin coatings.

From £0.85 ex VAT - £1.02 inc VAT

Plain Wooden Handled Paint Brushes in sizes 1/2", 1", 2", 3"& 4" Ideal for work with resins as handle will not react with solvent based products.

From £7.10 ex VAT - £8.52 inc VAT

Steel Roller Frames - Made from high strength galvanised steel, and available in 9" (Alloy), 12", 15" & 18". The Roller frame bar is secured with a split-pin allowing easy removal.

From £4.50 ex VAT - £5.40 inc VAT

Pumice aggregate is an extremely light aggregate which has the advantage of being able to mix into the paint prior to application. It is a non-microbead solution to a fine, aggregated finish. Pumice gives a rough-profiled finish and significantly increase slip resistance. When using, pour the pumice into the paint and mix thoroughly. After mixing, use the paint immediately. The paint must be applied with a roller to achieve a consistent finish.

From £5.50 ex VAT - £6.60 inc VAT

SuperTough Aggregate is an iron-silicate grit. It has good shatter resistance and has a hard, sharp finish to give fantastic grip. To use SuperTough Aggregate on a previously-painted floor, apply a coat of floor paint and then liberally scatter the grit over the surface of the wet paint. Allow the floor to dry for a full 24 hours. Once dry, remove the excess SuperTough Aggregate that hasn’t stuck with a soft brush. Then the paint over the whole surface of the floor again to seal the grit in place on the floor.


Both our Disposable and Standard brushes come in 5 different sizes, 0.5”, 1”, 2”, 3” and 4”, and they're all ideal for when working with resins because the plain wooden and plastic handles won't react negatively with other solvent based products. For the times when a roller is required, it's inevitable that you're going to need to replace the head from time to time. Our roller refills are made from high quality nylon have been heat-bonded together which means practically zero fluff is produced when in use. We also stock superior quality galvanised steel Roller Frames which come in four different sizes.