BULK ORDERS? CALL 01782 550733 FOR DISCOUNTS!
PRODUCT NAME
Quick Dry High Build Floor Paint
PRODUCT DATA SHEET
SAFETY DATA SHEET
Standard Colours |
Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White.
*Other RAL and British Standard colours can be made, dependent on the quantities required.
|
Dry Film Appearance |
Semi-gloss (60-70%)
|
Spreading Rate |
5-8m2 per litre, dependent on film thickness (10m2 @ 50mμ; 5m2 @ 100μ)
|
Touch Dry @20°C |
3-4 hours
|
Recoating Time @20°C |
Minimum 24 hours
|
Typical Wet-Film Thickness |
105-195μm per coat
|
Typical Dry-Film Thickness |
85-110μm per coat
|
Solids by Volume |
60% (ASTM D2697) ±3%, dependent on colour
|
VOC Information |
420g per litre (from formula to satisfy EU Solvent Emissions Directive)
|
Application Temperature |
10-35°C
|
Application Method |
Brush or roller
|
Substrates |
Suitably cleaned and dry surfaces
|
Thinners |
Thinning not recommended. For cleaning, use standard thinners.
|
Flash Point |
>25°C
|
Pack Size |
5 litre can; 20 litre can; 205 litre barrel
|
Shelf Life |
12 months
|
Quick Dry High Build Floor Paint – Product Description & Recommended Use
- A single-pack, quick-drying, high-build floor-coating providing good durability and impact resistance.
- Moderate protection against solvents, salt, water and cleaning chemicals.
- Available as a semi-gloss finish in a range of colours specially formulated to provide good aesthetics and safe use.
- Suitable for medium-duty commercial and industrial areas.
- This floor paint is easy to apply by roller and brush and easy to repaint on high-wear areas.
Standard Colours |
Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White.
*Other RAL and British Standard colours can be made, dependent on the quantities required.
|
Dry Film Appearance |
Matt
|
Spreading Rate |
5.5-8m2 per litre
|
Touch Dry @20°C |
15-30 minutes
|
Recoating Time @20°C |
14 hours
|
Typical Wet-Film Thickness |
120-160μm per coat
|
Typical Dry-Film Thickness |
65-90μm per coat
|
Solids by Volume |
56% (ASTM D2697) ±3%, dependent on colour
|
VOC Information |
430g per litre
|
Application Temperature |
10-35°C
|
Application Method |
Brush or roller
|
Substrates |
Suitably cleaned and dry surfaces
|
Thinners |
Xylene
|
Flash Point |
≥25°C
|
Pack Size |
5 litre can; 20 litre can; 205 litre barrel
|
Shelf Life |
12 months
|
Regal Prime and Seal – Product Description & Recommended Use
- A quick-air-drying, penetrating primer-coat which gives a matt finish.
- Made with high-quality alkyd resins and is lead and chrome-free.
- Excellent penetration into concrete and non-ferrous metal substrates.
- Designed to soak into the substrate, providing excellent adhesion of subsequent top coats.
- Will reduce the risk of delamination, due to poor penetration of top-coats, by anchoring the top-coat to the floor.
- Easy to apply by roller or brush.
- The ideal base for Regal Single-Pack Floor Paints to give a superior quality finish to your floor.
- Recommended for medium-duty commercial and industrial areas.