Regal Clear Finish
£42.00–£132.50 ex. VAT
£50.40–£159.00 incl. VAT
Regal Clear Finish is ideal as a finishing coat over our epoxy or single pack floor paints to enhance gloss levels. A 2-pack acrylic which is fast drying and has excellent hardness. To be applied very thinly.
Product Description & Recommended Use
- Regal Clear Finish is a two-pack, fast-drying, high gloss, clear, hard-wearing and protective finishing-coat.
- The hard, glossy finish will give your floor superb aesthetic appeal.
- Made with a tough, high quality, solvent-based acrylic co-polymer.
- Very good alkali and humidity resistance and excellent hardness.
- Can be applied over both the Regal Single-Pack and Regal Two-Pack flooring systems.
- Can be used to seal in decorative paint-flakes that are sprinkled onto the floor to give a granite effect.
- Can be mixed with metallic glitters to give a highly decorative finish to your floor. Ideal for shops, bars and other retail areas.
Note on Application
- Apply thinly.
- Not to be applied any thicker than 10m2 per litre.
- Applying this product too thickly may risk solvent entrapment and a surface that does not harden.
Technical Overview
Standard Colours |
None. This product is clear. |
Dry Film Appearance |
High Gloss |
Spreading Rate |
10m2 per litre |
Touch Dry @20°C |
1-2 hours |
Recoating Time @20°C |
12 hours |
Typical Wet-Film Thickness |
45-75μm per coat |
Typical Dry-Film Thickness |
25-40μm per coat |
Solids by Volume |
48% (ASTM D2697) ±3%, dependent on colour |
VOC Information |
430g per litre |
Application Temperature |
0-35°C |
Application Method |
Brush or roller |
Substrates |
Suitably cleaned and dry surfaces |
Thinners |
Xylene |
Flash Point |
≥25°C |
Pack Size |
5 litre can; 20 litre can |
Shelf Life |
12 months |
| Weight | N/A |
|---|---|
| Select Size | 5 Litres, 20 Litres |
WE AIM TO DISPATCH ORDERS RECEIVED PRE-NOON ON THE SAME DAY (STOCK DEPENDENT)
ALL ORDERS SENT ON A NEXT WORKING-DAY SERVICE
FREE DELIVERY ON ALL ORDERS OVER £300*
*£300 NET. Excludes surcharge areas - delivery surcharge will still apply.
Related products
£34.50–£85.50 ex. VAT
£41.40–£102.60 incl. VAT
£41.40–£102.60 incl. VAT
Anti Slip Quick Dry Concrete Floor Paint is a made with the addition of a wax additive to give more slip resistance to your floor. This is a single pack paint (does not need an activator) and gives protection against solvent, salt and water damage. Having good durability and impact resistance, it is suitable for use in heavy duty commercial and industrial areas. – Coverage: 5-10 m² per litre – Touch Drying Time: 3-6 hours – Recoat: 24 hours – Hard Drying Time: 48 hours
£34.50–£87.00 ex. VAT
£41.40–£104.40 incl. VAT
£41.40–£104.40 incl. VAT
This is a fast drying garage floor paint. A single pack, one-part paint which is easy to apply. Suitable for medium to heavy traffic areas, commercial and industrial use. Gives good protection against solvent, salt and water damage. UK made in our factory to give you one of the best garage floor paints. Available in a range of popular colours, grey garage floor paint being the bestselling colour. If you are looking to paint concrete which is bare or if you are repainting a concrete floor, we would recommend the use of Regal Prime and Seal which is our garage floor sealer, designed to coat the bare concrete or spot-prime worn areas.
£52.50–£158.50 ex. VAT
£63.00–£190.20 incl. VAT
£63.00–£190.20 incl. VAT
Two Pack High Build Epoxy Garage Floor Paint - Designed for application to concrete, cement and non ferrous metals. Excellent resistance to water, solvents, acids, alkalis and salts. Gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle / trucks). - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
£7.00–£21.50 ex. VAT
£8.40–£25.80 incl. VAT
£8.40–£25.80 incl. VAT
SuperTough Aggregate is an iron-silicate grit. With much larger particles than our Pumice Aggregate, it has a hard, sharp finish to give fantastic grip when used in conjunction with our floor paints. To use SuperTough Aggregate, firstly apply a coat of floor paint and then liberally scatter the grit over the surface of the wet paint. Allow the floor to dry for a full 24 hours. Once dry, use a soft brush to remove the excess SuperTough Aggregate that hasn’t stuck. Then paint over the whole surface of the floor again to seal the grit in place on the floor.
£40.00–£93.50 ex. VAT
£48.00–£112.20 incl. VAT
£48.00–£112.20 incl. VAT
Line Marking Paint - A quick drying floor paint used to mark out safe zones, work areas, walkways, hazard areas etc on your floor. A durable coating with good resistance to abrasion and impact along with with protection against solvent, salt and water damage. Ideally suited to factory floors, warehouses, service garages, car parks and other industrial areas where long lasting and clearly visible markings are required. Available in five colours.
£52.50–£158.50 ex. VAT
£63.00–£190.20 incl. VAT
£63.00–£190.20 incl. VAT
Two Pack Epoxy Floor Paint (Top Coat) - This epoxy floor coating is designed for application to concrete, cement and non ferrous metals. It provides excellent resistance to water, solvents, acids, alkalis and salts and gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days
£6.00–£18.50 ex. VAT
£7.20–£22.20 incl. VAT
£7.20–£22.20 incl. VAT
Pumice aggregate is an extremely lightweight natural material which is mixed into the paint prior to application. It gives a rough-profiled finish and significantly increases slip resistance. When using, pour the pumice into the paint and mix thoroughly. After mixing, use the paint immediately. Apply the paint with a roller to achieve a consistent finish. A natural stone alternative to plastic microbeads.
£34.50–£87.00 ex. VAT
£41.40–£104.40 incl. VAT
£41.40–£104.40 incl. VAT
Quick Dry High Build Floor Paint - A single pack quick dry floor coating which provides good durability against abrasion and impact along with with protection against solvent, salt and water damage. Very easy to apply. Suitable for heavy duty commercial and industrial areas.
£44.00–£122.50 ex. VAT
£52.80–£147.00 incl. VAT
£52.80–£147.00 incl. VAT
Two-Pack Epoxy Floor Sealer (Under Coat) - This epoxy floor paint (first coat) is designed to prepare the surface of concrete, cement and non ferrous metals. This gives an ideal base for epoxy topcoat or acts as a seal coat for bare concrete floors. Resistant to water, solvents, acids, alkalis and salts. Tough finish, and has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
£31.50–£82.00 ex. VAT
£37.80–£98.40 incl. VAT
£37.80–£98.40 incl. VAT
Polyurethane Concrete Floor Paint - A single pack high build floor coating giving medium durability against abrasion and impact, with limited protection against solvent, salt and water damage. Polyurethane Concrete Floor Paint is easy to apply with a gloss or semi-gloss finish. Suitable for light commercial and industrial areas.
£32.50–£67.50 ex. VAT
£39.00–£81.00 incl. VAT
£39.00–£81.00 incl. VAT
Floor Primer made to use in conjunction with any of the Regal single pack topcoat floor paints. Not suitable for use with our epoxy topcoat floor paint. Regal Prime and Seal is a single pack, quick drying, low viscosity, penetrating first-coat floor primer. Designed to soak into the substrate, it enhances adhesion of subsequent top coats by acting as an anchor layer between the substrate and floor paint. Regal Prime and Seal dries with a flat finish. The colour is non specific. - Coverage: 5-10 m² per litre - Touch Drying Time: 2-4 hours - Recoat: 24 hours - Hard Drying Time: 24 hours You might be thinking does floor paint need primer? Please read our information page 'what does floor primer do?'.
