Product Description & Recommended Use
- Regal Clear Finish is a two-pack, fast-drying, high gloss, clear, hard-wearing and protective finishing-coat.
- The hard, glossy finish will give your floor superb aesthetic appeal.
- Made with a tough, high quality, solvent-based acrylic co-polymer.
- Very good alkali and humidity resistance and excellent hardness.
- Can be applied over both the Regal Single-Pack and Regal Two-Pack flooring systems.
- Can be used to seal in decorative paint-flakes that are sprinkled onto the floor to give a granite effect.
- Can be mixed with metallic glitters to give a highly decorative finish to your floor. Ideal for shops, bars and other retail areas.
Note on Application
- Apply thinly.
- Not to be applied any thicker than 10m2 per litre.
- Applying this product too thickly may risk solvent entrapment and a surface that does not harden.
Standard Colours |
None. This product is clear. |
Dry Film Appearance |
High Gloss |
Spreading Rate |
10m2 per litre |
Touch Dry @20°C |
1-2 hours |
Recoating Time @20°C |
12 hours |
Typical Wet-Film Thickness |
45-75μm per coat |
Typical Dry-Film Thickness |
25-40μm per coat |
Solids by Volume |
48% (ASTM D2697) ±3%, dependent on colour |
VOC Information |
430g per litre |
Application Temperature |
10-35°C |
Application Method |
Brush or roller |
Substrates |
Suitably cleaned and dry surfaces |
Thinners |
Xylene |
Flash Point |
≥25°C |
Pack Size |
5 litre can; 20 litre can |
Shelf Life |
12 months |