Product Description & Recommended Use
- Regal Clear Finish is a two-pack, fast-drying, high gloss, clear, hard-wearing and protective finishing-coat.
 - The hard, glossy finish will give your floor superb aesthetic appeal.
 - Made with a tough, high quality, solvent-based acrylic co-polymer.
 - Very good alkali and humidity resistance and excellent hardness.
 - Can be applied over both the Regal Single-Pack and Regal Two-Pack flooring systems.
 - Can be used to seal in decorative paint-flakes that are sprinkled onto the floor to give a granite effect.
 - Can be mixed with metallic glitters to give a highly decorative finish to your floor. Ideal for shops, bars and other retail areas.
 
Note on Application
- Apply thinly.
 - Not to be applied any thicker than 10m2 per litre.
 - Applying this product too thickly may risk solvent entrapment and a surface that does not harden.
 
Standard Colours | 
 None. This product is clear.  | 
Dry Film Appearance | 
 High Gloss  | 
Spreading Rate | 
 10m2 per litre  | 
Touch Dry @20°C | 
 1-2 hours  | 
Recoating Time @20°C | 
 12 hours  | 
Typical Wet-Film Thickness | 
 45-75μm per coat  | 
Typical Dry-Film Thickness | 
 25-40μm per coat  | 
Solids by Volume | 
 48% (ASTM D2697) ±3%, dependent on colour  | 
VOC Information | 
 430g per litre  | 
Application Temperature | 
 0-35°C  | 
Application Method | 
 Brush or roller  | 
Substrates | 
 Suitably cleaned and dry surfaces  | 
Thinners | 
 Xylene  | 
Flash Point | 
 ≥25°C  | 
Pack Size | 
 5 litre can; 20 litre can  | 
Shelf Life | 
 12 months  | 



						
					
                      