From £25.50 ex VAT - £30.60 inc VAT
Antislip Quick Dry Concrete Floor Paint – A single pack quick drying floor coating. Gives good durability and impact resistance. This gives protection against solvent, salt and water damage. Low slip properties due to fine flat aggregated finish. Antislip Quick Dry Concrete Floor Paint is suitable for heavy duty commercial and industrial areas.
– Coverage: 5-10 m² per litre
– Touch Drying Time: 3-6 hours
– Recoat: 24 hours
– Hard Drying Time: 48 hours
Description
DOWNLOAD
DOWNLOAD
BULK ORDERS? CALL 01782 550733 FOR DISCOUNTS!
PRODUCT NAME
Antislip Quick Dry Concrete Floor Paint
PRODUCT DATA SHEET
SAFETY DATA SHEET
Technical Overview
Standard Colours |
Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White.
*Other RAL and British Standard colours can be made, dependent on the quantities required.
|
Dry Film Appearance |
Sheen, textured
|
Spreading Rate |
5-8m2 per litre, dependent on film thickness
|
Touch Dry @20°C |
3-4 hours
|
Recoating Time @20°C |
Minimum 24 hours
|
Typical Wet-Film Thickness |
105-170μm per coat
|
Typical Dry-Film Thickness |
60-95μm per coat
|
Solids by Volume |
58% (ASTM D2697) ±3%, dependent on colour
|
VOC Information |
420g per litre (from formula to satisfy EU Solvent Emissions Directive)
|
Application Temperature |
10-35°C
|
Application Method |
Brush or roller
|
Substrates |
Suitably cleaned and dry surfaces
|
Thinners |
Thinning not recommended. For cleaning, use standard thinners.
|
Flash Point |
>25°C
|
Pack Size |
5 litre can; 20 litre can; 205 litre barrel
|
Shelf Life |
12 months
|
Antislip Quick Dry Concrete Floor Paint – Product Description & Recommended Use
- A single-pack, quick-drying floor-coating providing good durability and impact resistance.
- Moderate protection against solvents, salt and water-damage are a distinct advantage.
- In high-risk areas, which may be prone to pedestrian slippage, the anti-slip properties of this floor paint meet most foot traffic requirements using a fine, aggregated-finish specially formulated to provide aesthetic and safe use.
- Suitable for medium-duty commercial and industrial areas.
- Easy to apply by roller and brush and easy to repaint on high wear areas.
Additional information
| Weight | N/A |
|---|---|
| Select Colour | Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpiller Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Slate Grey, Light Grey, Black, White |
| Select Size | 5 Litres, 20 Litres |
Related products
£27.00 ex VAT
Painting Essentials Sundries Pack - ideal for applying both single pack garage floor paint and two-pack epoxy floor paint. 3 x 4" brushes 1 x 15" roller frame 2 x 15" roller heads
From £85.00 ex VAT - £102.00 inc VAT
Two Pack Epoxy Floor Paint Bundle 5 Litres (25-50 sq meters coverage) - The two pack epoxy floor bundle is designed for heavy use commercial industrial areas or on flooring areas that require a low maintenance long lasting finish. The key advantages over a single pack product are greater resistance to impact and abrasion, also a much greater protection from chemical, acid and alkalis spills. A single pack floor paint may require annual maintenance to ensure high wear points don't erode however epoxy coat should last for a number of years. 3 x 5lts Product: 1x 5 lts TWO PACK EPOXY FLOOR SEALER (UNDERCOAT COAT) 1x 5lts TWO PACK EPOXY FLOOR PAINT (TOP COAT) 1x 5Lts Regal Clear Finish
From £192.00 ex VAT - £230.40 inc VAT
Double Garage Two Pack Garage Floor Paint Bundle - This epoxy floor paint bundle is designed for application to concrete garage floors and provides enough paint to coat a standard double garage floor (see diagram for dimensions). This bundle consists of: 2 x 5 Lts Two pack Epoxy Undercoat Sealer 2 x 5 Lts Two Pack Epoxy Floor Paint Topcoat (Select Colour)
From £26.00 ex VAT - £31.20 inc VAT
Plywood Paint / MDF Paint - A tough, long lasting, fast drying gloss finish made on a high build alkyd. High impact resistance, compatible with most primers or as a single coat. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
From £26.00 ex VAT - £31.20 inc VAT
Skip and Container paint - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Using Skip and Container paint eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This protects against corrosion and impacts.
From £26.50 ex VAT - £31.80 inc VAT
One Coat Gloss Paint - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This one coat paint protects against corrosion and impacts.
From £96.00 ex VAT - £115.20 inc VAT
Our One Pack Garage Floor Paint Double Garage Bundle is fast and effective way to paint a standard double garage floor (see diagram for dimensions). Simply prepare the concrete floor with Regal Prime and Seal and then coat to with a single pack quick dry floor coating in a colour of your choice! Our quick drying high build floor paint provides good durability against abrasion and impact along with with protection against solvent, salt and water damage. Our Single Garage One Pack Garage Floor Paint Bundle consists of: 2 x 5 Lts Regal Prime and Seal 2 x 5 Lts Quick Dry High Build Floor Paint (Select Colour)
From £23.50 ex VAT - £28.20 inc VAT
Polyurethane Concrete Floor Paint - A single pack high build floor coating giving medium durability against abrasion and impact, with limited protection against solvent, salt and water damage. Polyurethane Concrete Floor Paint is easy to apply with a gloss or semi-gloss finish. Suitable for light commercial and industrial areas.
From £33.00 ex VAT - £39.60 inc VAT
Milking Parlour Wall Paint - Designed for it’s resistance to moisture and industrial pollution, and is also extremely resistant to chemicals, acids and alkaline. Parlour paint is ideal for areas kept hygienically clean by jet washing and detergents. This is based on a chlorinated rubber, halogenated hydrocarbon resin, giving a semi-gloss finish. - Coverage: 5m² per litre - Touch Drying Time: 6hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs
From £67.00 ex VAT - £80.40 inc VAT
Single Pack Foor Paint Bundle 5 Litres (25-50 Sq meters Coverage) - The single pack floor paint bundle is aimed at the light industrial and commercial market. The pack includes all the products you will need to go from a bare concrete floor to a dust free, clean , protected and visually appealing floor. the three products in the bundle are formulated to work together, cross linking to for a durable flooring system. Single pack floor paints whilst not as durable as two pack epoxies are extremely easy to apply and are consistently fast drying in all year round temperatures. 3 x 5lts product comprising: 1 x 5lts Regal Prime and Seal 1 x 5lts QUICK DRY HIGH BUILD FLOOR PAINT 1 x 5Lts Regal Clear Finish
From £170.00 ex VAT - £204.00 inc VAT
Single Pack Foor Paint Bundle 3 x 20 Litres - The single pack floor paint bundle is aimed at the light industrial and commercial market. The pack includes all the products you will need to go from a bare concrete floor to a dust free, clean , protected and visually appealing floor. the three products in the bundle are formulated to work together, cross linking to for a durable flooring system. Single pack floor paints whilst not as durable as two pack epoxies are extremely easy to apply and are consistently fast drying in all year round temperatures. 3 x 20lts Product: 1x 20lts Regal Prime and Seal 1x 20lts QUICK DRY HIGH BUILD FLOOR PAINT 1x 20Lts Acrylic Based Regal Clear Finish (with Activator)
From £25.50 ex VAT - £30.60 inc VAT
Quick Drying Gloss Enamel - Enamel Paint - A tough, long lasting, fast drying metal paint with a gloss finish made on a high build alkyd. High impact resistance, compatible with most primers or as a single coat. Can be used for a variety of applications as diverse as machinery paint, skip paint, shipping container paint and tractor paint. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
From £5.50 ex VAT - £6.60 inc VAT
SuperTough Aggregate is an iron-silicate grit. It has good shatter resistance and has a hard, sharp finish to give fantastic grip. To use SuperTough Aggregate on a previously-painted floor, apply a coat of floor paint and then liberally scatter the grit over the surface of the wet paint. Allow the floor to dry for a full 24 hours. Once dry, remove the excess SuperTough Aggregate that hasn’t stuck with a soft brush. Then the paint over the whole surface of the floor again to seal the grit in place on the floor.
From £39.50 ex VAT - £47.40 inc VAT
Two-Pack Epoxy Topcoat Enamel - Designed to be used in conjunction with Regal epoxy primers for application to most metal substrates. This epoxy metal paint has excellent durability and impact resistance. This coating offers protection from solvents, acids, alkalis and salts. - Coverage: 5-10 m² per litre - Touch Drying Time: 12 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days
From £22.50 ex VAT - £27.00 inc VAT
Exterior Wood Paint - Exterior Metal Paint - A long oil based decorative gloss finish designed for a wide range of substrates. Ideal for wooden windows/doors, metal fencing/garage doors or concrete walls. This has excellent covering power and provides long lasting weather protection. - Coverage: 5 - 10 m2 per litre - Touch Drying Time: 12hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs
From £4.50 ex VAT - £5.40 inc VAT
Pumice aggregate is an extremely light aggregate which has the advantage of being able to mix into the paint prior to application. It is a non-microbead solution to a fine, aggregated finish. Pumice gives a rough-profiled finish and significantly increase slip resistance. When using, pour the pumice into the paint and mix thoroughly. After mixing, use the paint immediately. The paint must be applied with a roller to achieve a consistent finish.