Disposable Brushes
From: £0.60 ex. VAT - £0.72 inc. VAT
Plain Wooden Handled Paint Brushes in sizes 1/2″, 1″, 2″, 3″& 4″
Ideal for work with resins as handle will not react with solvent based products.
Save £££
Our paints are BETTER VALUE in 20L cans!
Weight | N/A |
---|---|
Select Brush size | 0.5 Inch, 1 Inch, 2 Inch, 3 Inch, 4 Inch |
WE AIM TO DISPATCH ORDERS RECEIVED PRE-NOON ON THE SAME DAY (STOCK DEPENDENT)
ALL ORDERS SENT ON A NEXT WORKING-DAY SERVICE
FREE DELIVERY ON ALL ORDERS OVER £300*
*£300 NET. Excludes surcharge areas - delivery surcharge will still apply.
Related products
Black-Stripe Nylon material is heat-bonded to the nylon core in manufacture. Ideal for painting floors, the nylon core is solvent resistant and the Nylon fabric is virtually fluff-free in use. This makes this type of roller refill ideal for use with epoxy resin floor paint and other solvent based coatings that would pull fluff from or disolve most other roller refills. Available in four sizes: 9", 12", 15" & 18" wide.
Paint Mixer - Ideal for mixing paint, adhesives, grout, mortar, cement and most liquid materials. This is drill attachment for mixing paint and can be used with most power drills. You must fully immerse the mixer paddle in the liquid before use. Stirrer-head size: 103mm x 80mm Length: Approx 40cm
Pumice aggregate is an extremely lightweight natural material which is mixed into the paint prior to application. It gives a rough-profiled finish and significantly increases slip resistance. When using, pour the pumice into the paint and mix thoroughly. After mixing, use the paint immediately. Apply the paint with a roller to achieve a consistent finish. A natural stone alternative to plastic microbeads.
Spiked Shoes (SPIKEDSHOES) Nylon Nail Shoes 1 Pair suitable for up to Shoe size 10 Strong webbing with metal buckles to secure 40mm Nail protrudes 30mm from bottom of shoe Ideal for use in walking over flooring adhesive and Resin coatings.
Plain Wooden Handled Paint Brushes in sizes 1/2", 1", 2", 3"& 4" Ideal for work with resins as handle will not react with solvent based products.
Steel Roller Frames - These floor roller frames are made from high strength galvanised steel, and available in 9" (Alloy), 12", 15" & 18". The Roller frame bar is secured with a split-pin allowing easy removal.
SuperTough Aggregate is an iron-silicate grit. With much larger particles than our Pumice Aggregate, it has a hard, sharp finish to give fantastic grip when used in conjunction with our floor paints. To use SuperTough Aggregate, firstly apply a coat of floor paint and then liberally scatter the grit over the surface of the wet paint. Allow the floor to dry for a full 24 hours. Once dry, use a soft brush to remove the excess SuperTough Aggregate that hasn’t stuck. Then paint over the whole surface of the floor again to seal the grit in place on the floor.