From £26.50 ex VAT - £31.80 inc VAT
One Coat High Build Steel Enamel – A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This protects against corrosion and impacts.
– Coverage: 5-10 m2 per litre
– Touch Drying Time: 3-6 hours
– Recoat: 16 hours
– Hard Drying Time: 48 hours
Description
[/row]
BULK ORDERS? CALL 01782 550733 FOR DISCOUNTS!
Technical Overview
Standard Colours |
Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White.
|
Dry Film Appearance |
Gloss
|
Spreading Rate |
5-10m2 per litre
|
Touch Dry @20°C |
3-6 hours
|
Recoating Time @20°C |
Minimum 16 hours
|
Typical Wet-Film Thickness |
100-150μm per coat
|
Typical Dry-Film Thickness |
50-75μm per coat
|
Solids by Volume |
50% (ASTM D2697)
|
VOC Information |
430g per litre
|
Application Temperature |
10-35°C
|
Application Method |
Airless spray, air-assisted spray (15-17 thou tip) brush or roller
|
Substrates |
Suitably cleaned and dry surfaces
|
Thinners |
Thinning not recommended. For cleaning, use standard thinners.
|
Flash Point |
≥25°C
|
Pack Size |
5 litre can; 20 litre can; 205 litre barrel
|
Shelf Life |
12 months
|
One Coat High Build Steel Enamel – Product Description & Recommended Use
- A tough, long-lasting, quick-drying gloss enamel with excellent durability.
- High impact resistance.
- Made from high-build alkyd and is lead and chrome-free.
- Easy to apply by airless spray, conventional spray or roller and brush.
- Suitable for general industrial use and structural steelwork.
- Compatible with most single-pack primers or can be applied as a single coat over existing enamel.
- Easy to recoat and with good cut-edge coverage.
Additional information
| Weight | N/A |
|---|---|
| Select Colour | Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Slate Grey, Light Grey, Black, White |
| Select Size | 5 Litres, 20 Litres |
Related products
From £67.00 ex VAT - £80.40 inc VAT
Single Pack Foor Paint Bundle 5 Litres (25-50 Sq meters Coverage) - The single pack floor paint bundle is aimed at the light industrial and commercial market. The pack includes all the products you will need to go from a bare concrete floor to a dust free, clean , protected and visually appealing floor. the three products in the bundle are formulated to work together, cross linking to for a durable flooring system. Single pack floor paints whilst not as durable as two pack epoxies are extremely easy to apply and are consistently fast drying in all year round temperatures. 3 x 5lts product comprising: 1 x 5lts Regal Prime and Seal 1 x 5lts QUICK DRY HIGH BUILD FLOOR PAINT 1 x 5Lts Regal Clear Finish
From £39.50 ex VAT - £47.40 inc VAT
Two Pack High Build Epoxy Garage Floor Paint - Designed for application to concrete, cement and non ferrous metals. Excellent resistance to water, solvents, acids, alkalis and salts. Gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
From £26.00 ex VAT - £31.20 inc VAT
Skip and Container paint - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Using Skip and Container paint eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This protects against corrosion and impacts.
From £39.50 ex VAT - £47.40 inc VAT
Two-Pack Epoxy Topcoat Enamel - Designed to be used in conjunction with Regal epoxy primers for application to most metal substrates. This epoxy metal paint has excellent durability and impact resistance. This coating offers protection from solvents, acids, alkalis and salts. - Coverage: 5-10 m² per litre - Touch Drying Time: 12 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days
From £85.00 ex VAT - £102.00 inc VAT
Two Pack Epoxy Floor Paint Bundle 5 Litres (25-50 sq meters coverage) - The two pack epoxy floor bundle is designed for heavy use commercial industrial areas or on flooring areas that require a low maintenance long lasting finish. The key advantages over a single pack product are greater resistance to impact and abrasion, also a much greater protection from chemical, acid and alkalis spills. A single pack floor paint may require annual maintenance to ensure high wear points don't erode however epoxy coat should last for a number of years. 3 x 5lts Product: 1x 5 lts TWO PACK EPOXY FLOOR SEALER (UNDERCOAT COAT) 1x 5lts TWO PACK EPOXY FLOOR PAINT (TOP COAT) 1x 5Lts Regal Clear Finish
From £25.50 ex VAT - £30.60 inc VAT
Agricultural Oxide - A long oil based protective metal coating, suitable for all types of interior/exterior substrates. It has excellent covering power and can be used on block work, steel sheets, asbestos sheeting as well as wood. It has a good gloss finish, gives protection against weathering and corrosion.
From £170.00 ex VAT - £204.00 inc VAT
Single Pack Foor Paint Bundle 3 x 20 Litres - The single pack floor paint bundle is aimed at the light industrial and commercial market. The pack includes all the products you will need to go from a bare concrete floor to a dust free, clean , protected and visually appealing floor. the three products in the bundle are formulated to work together, cross linking to for a durable flooring system. Single pack floor paints whilst not as durable as two pack epoxies are extremely easy to apply and are consistently fast drying in all year round temperatures. 3 x 20lts Product: 1x 20lts Regal Prime and Seal 1x 20lts QUICK DRY HIGH BUILD FLOOR PAINT 1x 20Lts Acrylic Based Regal Clear Finish (with Activator)
From £25.50 ex VAT - £30.60 inc VAT
Antislip Quick Dry Concrete Floor Paint - A single pack quick drying floor coating. Gives good durability and impact resistance. This gives protection against solvent, salt and water damage. Low slip properties due to fine flat aggregated finish. Antislip Quick Dry Concrete Floor Paint is suitable for heavy duty commercial and industrial areas. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 24 hours - Hard Drying Time: 48 hours
From £25.50 ex VAT - £30.60 inc VAT
Quick Dry Garage Floor Paint - A single pack quick dry floor coating, giving good durability against abrasion and impact with protection against solvent, salt and water damage. Quick Dry Garage Floor Paint is easy to apply with a choice of finishes i.e. gloss/semi/matt. Suitable for heavy duty commercial and industrial areas.
From £26.50 ex VAT - £31.80 inc VAT
One Coat Gloss Paint - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This one coat paint protects against corrosion and impacts.
From £4.50 ex VAT - £5.40 inc VAT
Pumice aggregate is an extremely light aggregate which has the advantage of being able to mix into the paint prior to application. It is a non-microbead solution to a fine, aggregated finish. Pumice gives a rough-profiled finish and significantly increase slip resistance. When using, pour the pumice into the paint and mix thoroughly. After mixing, use the paint immediately. The paint must be applied with a roller to achieve a consistent finish.
From £26.00 ex VAT - £31.20 inc VAT
Plywood Paint / MDF Paint - A tough, long lasting, fast drying gloss finish made on a high build alkyd. High impact resistance, compatible with most primers or as a single coat. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
From £23.50 ex VAT - £28.20 inc VAT
Polyurethane Concrete Floor Paint - A single pack high build floor coating giving medium durability against abrasion and impact, with limited protection against solvent, salt and water damage. Polyurethane Concrete Floor Paint is easy to apply with a gloss or semi-gloss finish. Suitable for light commercial and industrial areas.
From £29.50 ex VAT - £35.40 inc VAT
Line Marking Paint - A single-pack quick dry high build floor paint which provides very good durability against abrasion and impact along with with protection against solvent, salt and water damage.
From £25.50 ex VAT - £30.60 inc VAT
Quick Drying Gloss Enamel - Enamel Paint - A tough, long lasting, fast drying metal paint with a gloss finish made on a high build alkyd. High impact resistance, compatible with most primers or as a single coat. Can be used for a variety of applications as diverse as machinery paint, skip paint, shipping container paint and tractor paint. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
From £39.50 ex VAT - £47.40 inc VAT
Two Pack Epoxy Floor Paint (Top Coat) - This epoxy floor coating is designed for application to concrete, cement and non ferrous metals. It provides excellent resistance to water, solvents, acids, alkalis and salts and gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days