
From £35.00 ex VAT - £42.00 inc VAT
Aluminium Quick Dry Enamel with a tough, quick drying finish. A metal paint made with high grade aluminium flake, rather than pigment, which is dissolved in solvent for 24 hours and diluted with urethan alkyd. Heat resistant up to 150 degrees C. Steel-grey in finish. Typically used to refurbish truck wheels. Advisable to spray. Never use a roller with this product.

Aluminium Quick Dry Enamel – Product Description & Recommended Use
- A single-pack, quick-air-drying aluminium-flake enamel topcoat with a tough, steel-grey sheen finish.
- This metal paint is made from high-quality synthetic resins and premium grade aluminium flake.
• Ideally applied by airless or conventional spray but can be brushed where necessary. Rolling not recommended.
• Suitable for direct-to-metal applications (typical use is to refurbish truck wheels).
• Suitable for application to steel and non-ferrous metal, and heavy-duty industrial use.
• For higher temperatures, we recommend thin films to reduce the risk of thermal-shock cracks of the paint-film during heating and cooling cycles.
Standard Colours |
Aluminium
|
Dry Film Appearance |
Sheen finish (50-60% gloss)
|
Spreading Rate |
6.5m2 per litre @75μm.
|
Touch Dry @20°C |
1-2 hours
|
Recoating Time @20°C |
Minimum 16 hours
|
Typical Wet-Film Thickness |
50-150μm per coat
|
Typical Dry-Film Thickness |
25-75μm per coat
|
Solids by Volume |
50% (ASTM D2697)
|
VOC Information |
468g per litre
|
Application Temperature |
10-35°C
|
Application Method |
Airless spray, air-assisted spray (15-17 thou tip) brush or roller
|
Substrates |
Suitably cleaned and dry surfaces. Steel and non-ferrous metal.
|
Thinners |
Xylene
|
Flash Point |
≥25°C
|
Pack Size |
5 litre can; 20 litre can; 205 litre barrel
|
Shelf Life |
12 months
|
Regal Paints® - Metal Paint Manufacturers
Regal Paints® manufacture high performance metal paint for a range of industrial and commercial applications. These specialist paints include our two pack epoxy metal paints as well as our single pack metal paints like Aluminium Quick Dry Enamel, Decorative Gloss, One Coat Steel Enamel, Quick Drying Gloss Enamel, and skip paint. Our paints are also available in a versatile range of colours, including old favourites like red oxide primer and red oxide paint as we well as modern staples like black metal paint and grey metal paint. All of the Regal range of metal primers and topcoats are formulated to provide the very best possible protection on a wide range of substrates. We continue to supply our paints to many new and long-standing customers in the engineering, agricultural, construction and trade sectors and are able to formulate and supply bespoke solutions and manufacture to your RAL (quantity dependent). In addition to our range of metal paint products, Regal Paints provide a comprehensive selection of floor paint, masonry paint and timber paint as well as paints for specialist applications.
Weight | N/A |
---|---|
Select Size | 5 Litres, 20 Litres |
Related products
Two Pack High Build Epoxy Garage Floor Paint - Designed for application to concrete, cement and non ferrous metals. Excellent resistance to water, solvents, acids, alkalis and salts. Gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
Single Pack Foor Paint Bundle 3 x 20 Litres - The single pack floor paint bundle is aimed at the light industrial and commercial market. The pack includes all the products you will need to go from a bare concrete floor to a dust free, clean , protected and visually appealing floor. the three products in the bundle are formulated to work together, cross linking to for a durable flooring system. Single pack floor paints whilst not as durable as two pack epoxies are extremely easy to apply and are consistently fast drying in all year round temperatures. 3 x 20lts Product: 1x 20lts Regal Prime and Seal 1x 20lts QUICK DRY HIGH BUILD FLOOR PAINT 1x 20Lts Acrylic Based Regal Clear Finish (with Activator)
Pumice aggregate is an extremely light aggregate which has the advantage of being able to mix into the paint prior to application. It is a non-microbead solution to a fine, aggregated finish. Pumice gives a rough-profiled finish and significantly increase slip resistance. When using, pour the pumice into the paint and mix thoroughly. After mixing, use the paint immediately. The paint must be applied with a roller to achieve a consistent finish.
Exterior Wood Paint - Exterior Metal Paint - A long oil based decorative gloss finish designed for a wide range of substrates. Ideal for wooden windows/doors, metal fencing/garage doors or concrete walls. This has excellent covering power and provides long lasting weather protection. - Coverage: 5 - 10 m2 per litre - Touch Drying Time: 12hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs
One Coat High Build Steel Enamel - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This protects against corrosion and impacts. - Coverage: 5-10 m2 per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
Two Pack Epoxy Floor Paint Bundle 20 Litres (100-200 sq meters coverage) - The two pack epoxy floor bundle is designed for heavy use commercial industrial areas or on flooring areas that require a low maintenance long lasting finish. The key advantages over a single pack product are greater resistance to impact and abrasion, also a much greater protection from chemical, acid and alkalis spills. A single pack floor paint may require annual maintenance to ensure high wear points don't erode however epoxy coat should last for a number of years. 3 x 20 lts Product: 1x 20 lts TWO PACK EPOXY FLOOR SEALER (UNDERCOAT COAT) 1x 20lts TWO PACK EPOXY FLOOR PAINT (TOP COAT) 1x 20Lts Regal Clear Finish
Anticorrosive Quick Dry Primer is a single pack priming solution suitable for most metal substrates. Also suitable for pre-treated aluminium and galvanised steel. Anticorrosive Quick Dry Primer gives excellent protection against corrosion. Excellent build levels and can be re-coated in most types of finish. - Coverage: 5 m² per litre - Touch Drying Time: 30 mins - 1 hr - Recoat: 12 hrs - Hard Drying Time: 24 hrs
Two-Pack Epoxy Topcoat Enamel - Designed to be used in conjunction with Regal epoxy primers for application to most metal substrates. This epoxy metal paint has excellent durability and impact resistance. This coating offers protection from solvents, acids, alkalis and salts. - Coverage: 5-10 m² per litre - Touch Drying Time: 12 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days
Quick Dry High Build Floor Paint - A single pack quick dry floor coating which provides good durability against abrasion and impact along with with protection against solvent, salt and water damage. Very easy to apply. Suitable for heavy duty commercial and industrial areas.
Quick Drying Gloss Enamel - Enamel Paint - A tough, long lasting, fast drying metal paint with a gloss finish made on a high build alkyd. High impact resistance, compatible with most primers or as a single coat. Can be used for a variety of applications as diverse as machinery paint, skip paint, shipping container paint and tractor paint. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
Polyurethane Concrete Floor Paint - A single pack high build floor coating giving medium durability against abrasion and impact, with limited protection against solvent, salt and water damage. Polyurethane Concrete Floor Paint is easy to apply with a gloss or semi-gloss finish. Suitable for light commercial and industrial areas.
Single Pack Foor Paint Bundle 5 Litres (25-50 Sq meters Coverage) - The single pack floor paint bundle is aimed at the light industrial and commercial market. The pack includes all the products you will need to go from a bare concrete floor to a dust free, clean , protected and visually appealing floor. the three products in the bundle are formulated to work together, cross linking to for a durable flooring system. Single pack floor paints whilst not as durable as two pack epoxies are extremely easy to apply and are consistently fast drying in all year round temperatures. 3 x 5lts product comprising: 1 x 5lts Regal Prime and Seal 1 x 5lts QUICK DRY HIGH BUILD FLOOR PAINT 1 x 5Lts Regal Clear Finish
Two Pack Epoxy Floor Paint (Top Coat) - This epoxy floor coating is designed for application to concrete, cement and non ferrous metals. It provides excellent resistance to water, solvents, acids, alkalis and salts and gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days
One Coat Gloss Paint - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This one coat paint protects against corrosion and impacts.
Agricultural Oxide - A long oil based protective metal coating, suitable for all types of interior/exterior substrates. It has excellent covering power and can be used on block work, steel sheets, asbestos sheeting as well as wood. It has a good gloss finish, gives protection against weathering and corrosion.
Antislip Quick Dry Concrete Floor Paint - A single pack quick drying floor coating. Gives good durability and impact resistance. This gives protection against solvent, salt and water damage. Low slip properties due to fine flat aggregated finish. Antislip Quick Dry Concrete Floor Paint is suitable for heavy duty commercial and industrial areas. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 24 hours - Hard Drying Time: 48 hours