
From £22.50 ex VAT - £27.00 inc VAT
Anticorrosive Quick Dry Primer is a single pack priming solution suitable for most metal substrates. Also suitable for pre-treated aluminium and galvanised steel. Anticorrosive Quick Dry Primer gives excellent protection against corrosion. Excellent build levels and can be re-coated in most types of finish.
– Coverage: 5 m² per litre
– Touch Drying Time: 30 mins – 1 hr
– Recoat: 12 hrs
– Hard Drying Time: 24 hrs

BULK ORDERS? CALL 01782 550733 FOR DISCOUNTS!
COLOURS

Red Oxide

Light Grey
Standard Colours |
Slate Grey and Red Oxide
|
Dry Film Appearance |
Flat
|
Spreading Rate |
5-8m2 per litre (spray application), dependent on film thickness (10m2 @ 50mμ)
|
Touch Dry @20°C |
30 minutes - 1 hour
|
Recoating Time @20°C |
Minimum 12 hours
|
Typical Wet-Film Thickness |
100-150μm per coat
|
Typical Dry-Film Thickness |
50-75μm per coat
|
Solids by Volume |
50% (ASTM D2697) ±3%, dependent on colour
|
VOC Information |
430g per litre (from formula to satisfy EU Solvent Emissions Directive)
|
Application Temperature |
10-35°C
|
Application Method |
Ideally spray; roller or brush for small areas
|
Substrates |
Suitably cleaned and dry surfaces
|
Thinners |
Thinning not recommended. For cleaning, use white spirit.
|
Flash Point |
>25°C
|
Pack Size |
5 litre can; 20 litre can; 205 litre barrel
|
Shelf Life |
12 months
|
Anticorrosive Quick Dry Primer Reviews
Weight | N/A |
---|---|
Select Colour | Red Oxide, Light Grey |
Select Size | 5 Litres, 20 Litres |
Related products
One Coat High Build Steel Enamel - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This protects against corrosion and impacts. - Coverage: 5-10 m2 per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
Exterior Wood Paint - Exterior Metal Paint - A long oil based decorative gloss finish designed for a wide range of substrates. Ideal for wooden windows/doors, metal fencing/garage doors or concrete walls. This has excellent covering power and provides long lasting weather protection. - Coverage: 5 - 10 m2 per litre - Touch Drying Time: 12hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs
Quick Dry High Build Floor Paint - A single pack quick dry floor coating which provides good durability against abrasion and impact along with with protection against solvent, salt and water damage. Very easy to apply. Suitable for heavy duty commercial and industrial areas.
Line Marking Paint - A single-pack quick dry high build floor paint which provides very good durability against abrasion and impact along with with protection against solvent, salt and water damage.
Two Pack High Build Epoxy Garage Floor Paint - Designed for application to concrete, cement and non ferrous metals. Excellent resistance to water, solvents, acids, alkalis and salts. Gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
Single Pack Foor Paint Bundle 3 x 20 Litres - The single pack floor paint bundle is aimed at the light industrial and commercial market. The pack includes all the products you will need to go from a bare concrete floor to a dust free, clean , protected and visually appealing floor. the three products in the bundle are formulated to work together, cross linking to for a durable flooring system. Single pack floor paints whilst not as durable as two pack epoxies are extremely easy to apply and are consistently fast drying in all year round temperatures. 3 x 20lts Product: 1x 20lts Regal Prime and Seal 1x 20lts QUICK DRY HIGH BUILD FLOOR PAINT 1x 20Lts Acrylic Based Regal Clear Finish (with Activator)
High Build Phosphate Quick Dry Primer is a single pack priming solution suitable for most metal substrates. This metal paint is also suitable for pre-treated aluminium and galvanised steel. High Build Phosphate Quick Dry Primer gives excellent protection against corrosion. Excellent build levels and can be re-coated in most types of finish. - Coverage: 5 m² per litre - Touch Drying Time: 30 mins - 1 hr - Recoat: 12 hrs - Hard Drying Time: 24 hrs
Two Pack Epoxy Floor Paint (Top Coat) - This epoxy floor coating is designed for application to concrete, cement and non ferrous metals. It provides excellent resistance to water, solvents, acids, alkalis and salts and gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days
Agricultural Oxide - A long oil based protective metal coating, suitable for all types of interior/exterior substrates. It has excellent covering power and can be used on block work, steel sheets, asbestos sheeting as well as wood. It has a good gloss finish, gives protection against weathering and corrosion.
Clean n Etch 5L - This product is made for very smooth / power floated floors or dirty floors. Clean N Etch is a highly concentrated blend of non-fuming acidic compounds and cleaning agents, specifically developed to prepare concrete floors prior to applying paints and other protective coatings.
Two Pack Epoxy Floor Paint Bundle 20 Litres (100-200 sq meters coverage) - The two pack epoxy floor bundle is designed for heavy use commercial industrial areas or on flooring areas that require a low maintenance long lasting finish. The key advantages over a single pack product are greater resistance to impact and abrasion, also a much greater protection from chemical, acid and alkalis spills. A single pack floor paint may require annual maintenance to ensure high wear points don't erode however epoxy coat should last for a number of years. 3 x 20 lts Product: 1x 20 lts TWO PACK EPOXY FLOOR SEALER (UNDERCOAT COAT) 1x 20lts TWO PACK EPOXY FLOOR PAINT (TOP COAT) 1x 20Lts Regal Clear Finish
Single Pack Foor Paint Bundle 5 Litres (25-50 Sq meters Coverage) - The single pack floor paint bundle is aimed at the light industrial and commercial market. The pack includes all the products you will need to go from a bare concrete floor to a dust free, clean , protected and visually appealing floor. the three products in the bundle are formulated to work together, cross linking to for a durable flooring system. Single pack floor paints whilst not as durable as two pack epoxies are extremely easy to apply and are consistently fast drying in all year round temperatures. 3 x 5lts product comprising: 1 x 5lts Regal Prime and Seal 1 x 5lts QUICK DRY HIGH BUILD FLOOR PAINT 1 x 5Lts Regal Clear Finish
Antislip Quick Dry Concrete Floor Paint - A single pack quick drying floor coating. Gives good durability and impact resistance. This gives protection against solvent, salt and water damage. Low slip properties due to fine flat aggregated finish. Antislip Quick Dry Concrete Floor Paint is suitable for heavy duty commercial and industrial areas. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 24 hours - Hard Drying Time: 48 hours
Skip and Container paint - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Using Skip and Container paint eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This protects against corrosion and impacts.
Quick Drying Gloss Enamel - Enamel Paint - A tough, long lasting, fast drying metal paint with a gloss finish made on a high build alkyd. High impact resistance, compatible with most primers or as a single coat. Can be used for a variety of applications as diverse as machinery paint, skip paint, shipping container paint and tractor paint. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
Two-Pack Epoxy Metal Primer - Designed for a wide range of metal substrates, our two pack epoxy primer offers excellent durability and resistance to contact with solvents, acids, alkalis and salts. It’s hardwearing surface gives good protection against corrosion due to it’s phosphate content. Two-Pack Epoxy Metal Primer is suitable for galvanised steel and aluminium. - Coverage: 5-10 m² per litre - Touch Drying Time: 12 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days