Plywood Paint / MDF Paint
£35.00–£93.00 ex. VAT
£42.00–£111.60 incl. VAT
Plywood Paint / MDF Paint – A tough, long lasting, fast drying gloss finish made on a high build alkyd. High impact resistance, compatible with most primers or as a single coat.
– Coverage: 5-10 m² per litre
– Touch Drying Time: 3-6 hours
– Recoat: 16 hours
– Hard Drying Time: 48 hours
BULK ORDERS? CALL 01782 550733 FOR DISCOUNTS!
Technical Overview
Standard Colours |
Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White. *Other RAL and British Standard colours can be made, dependent on the quantities required. |
Dry Film Appearance |
Sheen, textured |
Spreading Rate |
5-8m2 per litre, dependent on film thickness |
Touch Dry @20°C |
3-4 hours |
Recoating Time @20°C |
Minimum 24 hours |
Typical Wet-Film Thickness |
105-170μm per coat |
Typical Dry-Film Thickness |
60-95μm per coat |
Solids by Volume |
58% (ASTM D2697) ±3%, dependent on colour |
VOC Information |
420g per litre (from formula to satisfy EU Solvent Emissions Directive) |
Application Temperature |
0-35°C |
Application Method |
Brush or roller |
Substrates |
Suitably cleaned and dry surfaces |
Thinners |
Thinning not recommended. For cleaning, use standard thinners. |
Flash Point |
>25°C |
Pack Size |
5 litre can; 20 litre can; 205 litre barrel |
Shelf Life |
12 months |
| Weight | N/A |
|---|---|
| Select Colour | Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Slate Grey, Light Grey, Black, White |
| Select Size | 5 Litres, 20 Litres |
WE AIM TO DISPATCH ORDERS RECEIVED PRE-NOON ON THE SAME DAY (STOCK DEPENDENT)
ALL ORDERS SENT ON A NEXT WORKING-DAY SERVICE
FREE DELIVERY ON ALL ORDERS OVER £300*
*£300 NET. Excludes surcharge areas - delivery surcharge will still apply.
Related products
£34.50–£87.00 ex. VAT
£41.40–£104.40 incl. VAT
£41.40–£104.40 incl. VAT
Quick Dry High Build Floor Paint - A single pack quick dry floor coating which provides good durability against abrasion and impact along with with protection against solvent, salt and water damage. Very easy to apply. Suitable for heavy duty commercial and industrial areas.
£36.00–£93.50 ex. VAT
£43.20–£112.20 incl. VAT
£43.20–£112.20 incl. VAT
One Coat High Build Steel Enamel - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This protects against corrosion and impacts. - Coverage: 5-10 m2 per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
£121.88–£179.38 ex. VAT
£146.26–£215.26 incl. VAT
£146.26–£215.26 incl. VAT
Two Pack Epoxy Floor Paint Bundle 5 Litres - The two pack epoxy floor bundle is designed for heavy use commercial industrial areas or on flooring areas that require a low maintenance long lasting finish. The key advantages over a single pack product are greater resistance to impact and abrasion, also a much greater protection from chemical, acid and alkalis spills. A single pack floor paint may require annual maintenance to ensure high wear points don't erode however epoxy coatings should last for a number of years. Bundle includes 3 x 5 litre products: 1 x 5 lts two pack epoxy floor sealer 1 x 5 lts two pack epoxy floor paint top coat 1 x 5 lts Regal Clear Finish
£52.50–£158.50 ex. VAT
£63.00–£190.20 incl. VAT
£63.00–£190.20 incl. VAT
A two-Pack (or two-part) epoxy paint for metal, a topcoat enamel which is designed to be used in conjunction with Regal epoxy primer for application to most metal substrates. This epoxy metal paint has excellent durability and impact resistance. Offers protection from solvents, acids, alkalis and salts. - Coverage: 5-10 m² per litre - Touch Drying Time: 12 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days
£42.00–£120.00 ex. VAT
£50.40–£144.00 incl. VAT
£50.40–£144.00 incl. VAT
Aluminium Quick Dry Enamel with a tough, quick drying finish. A metal paint made with high grade aluminium flake, rather than pigment, which is dissolved in solvent for 24 hours and diluted with urethan alkyd. Heat resistant up to 150 degrees C. Steel-grey in finish. Typically used to refurbish truck wheels. Advisable to spray. Never use a roller with this product.
£34.50–£78.00 ex. VAT
£41.40–£93.60 incl. VAT
£41.40–£93.60 incl. VAT
Agricultural Oxide - A long oil based protective metal coating, suitable for all types of interior/exterior substrates. It has excellent covering power and can be used on block work, steel sheets, asbestos sheeting as well as wood. It has a good gloss finish, gives protection against weathering and corrosion.
£34.50–£87.00 ex. VAT
£41.40–£104.40 incl. VAT
£41.40–£104.40 incl. VAT
This is a fast drying garage floor paint. A single pack, one-part paint which is easy to apply. Suitable for medium to heavy traffic areas, commercial and industrial use. Gives good protection against solvent, salt and water damage. UK made in our factory to give you one of the best garage floor paints. Available in a range of popular colours, grey garage floor paint being the bestselling colour. If you are looking to paint concrete which is bare or if you are repainting a concrete floor, we would recommend the use of Regal Prime and Seal which is our garage floor sealer, designed to coat the bare concrete or spot-prime worn areas.
£34.50–£72.50 ex. VAT
£41.40–£87.00 incl. VAT
£41.40–£87.00 incl. VAT
Anticorrosive High Build Phosphate Quick Dry Primer is a single pack priming solution suitable for most metal substrates. This metal paint is also suitable for pre-treated aluminium and galvanised steel. High Build Phosphate Quick Dry Primer gives excellent protection against corrosion. Excellent build levels and can be re-coated in most types of finish. - Coverage: 5 m² per litre - Touch Drying Time: 30 mins - 1 hr - Recoat: 12 hrs - Hard Drying Time: 24 hrs
£40.00–£93.50 ex. VAT
£48.00–£112.20 incl. VAT
£48.00–£112.20 incl. VAT
Line Marking Paint - A quick drying floor paint used to mark out safe zones, work areas, walkways, hazard areas etc on your floor. A durable coating with good resistance to abrasion and impact along with with protection against solvent, salt and water damage. Ideally suited to factory floors, warehouses, service garages, car parks and other industrial areas where long lasting and clearly visible markings are required. Available in five colours.
£30.50–£74.50 ex. VAT
£36.60–£89.40 incl. VAT
£36.60–£89.40 incl. VAT
Exterior Wood Paint - Exterior Metal Paint - A long oil based decorative gloss finish designed for a wide range of substrates. Ideal for wooden windows/doors, metal fencing/garage doors or concrete walls. This has excellent covering power and provides long lasting weather protection. - Coverage: 5 - 10 m2 per litre - Touch Drying Time: 12hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs
£31.50–£82.00 ex. VAT
£37.80–£98.40 incl. VAT
£37.80–£98.40 incl. VAT
Polyurethane Concrete Floor Paint - A single pack high build floor coating giving medium durability against abrasion and impact, with limited protection against solvent, salt and water damage. Polyurethane Concrete Floor Paint is easy to apply with a gloss or semi-gloss finish. Suitable for light commercial and industrial areas.
£43.50–£121.50 ex. VAT
£52.20–£145.80 incl. VAT
£52.20–£145.80 incl. VAT
Milking Parlour Wall Paint - Designed for it’s resistance to moisture and industrial pollution, and is also extremely resistant to chemicals, acids and alkaline. Parlour paint is ideal for areas kept hygienically clean by jet washing and detergents. This is based on a chlorinated rubber, halogenated hydrocarbon resin, giving a semi-gloss finish. - Coverage: 5m² per litre - Touch Drying Time: 6hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs
£52.50–£158.50 ex. VAT
£63.00–£190.20 incl. VAT
£63.00–£190.20 incl. VAT
Two Pack High Build Epoxy Garage Floor Paint - Designed for application to concrete, cement and non ferrous metals. Excellent resistance to water, solvents, acids, alkalis and salts. Gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle / trucks). - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
£48.50 ex. VAT
£58.20 incl. VAT
£58.20 incl. VAT
Our White Masonry Paint is a water borne (water based) masonry paint with a smooth sheen finish. Based on acrylic resin. Excellent covering power with long lasting protection to exterior walls, guarding against weather damage. Can also be used to paint internal brick and concrete walls of industrial units, factories etc. Sold in 20 litre cans and also available in Magnolia. Bespoke colours can be made for orders over 200 litres. Please contact us for more details.
£36.00–£93.50 ex. VAT
£43.20–£112.20 incl. VAT
£43.20–£112.20 incl. VAT
One Coat Gloss Paint - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This one coat paint protects against corrosion and impacts.
£34.50–£85.50 ex. VAT
£41.40–£102.60 incl. VAT
£41.40–£102.60 incl. VAT
Anti Slip Quick Dry Concrete Floor Paint is a made with the addition of a wax additive to give more slip resistance to your floor. This is a single pack paint (does not need an activator) and gives protection against solvent, salt and water damage. Having good durability and impact resistance, it is suitable for use in heavy duty commercial and industrial areas. – Coverage: 5-10 m² per litre – Touch Drying Time: 3-6 hours – Recoat: 24 hours – Hard Drying Time: 48 hours
