Antislip Quick Dry Concrete Floor Paint
£34.50–£85.50 ex. VAT
£41.40–£102.60 incl. VAT
Anti Slip Quick Dry Concrete Floor Paint is a made with the addition of a wax additive to give more slip resistance to your floor. This is a single pack paint (does not need an activator) and gives protection against solvent, salt and water damage. Having good durability and impact resistance, it is suitable for use in heavy duty commercial and industrial areas.
– Coverage: 5-10 m² per litre
– Touch Drying Time: 3-6 hours
– Recoat: 24 hours
– Hard Drying Time: 48 hours
BULK ORDERS? CALL 01782 550733 FOR DISCOUNTS!
PRODUCT NAME
Antislip Quick Dry Concrete Floor Paint
PRODUCT DATA SHEET
SAFETY DATA SHEET
Technical Overview
Standard Colours |
Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White. *Other RAL and British Standard colours can be made, dependent on the quantities required. |
Dry Film Appearance |
Sheen, textured |
Spreading Rate |
5-8m2 per litre, dependent on film thickness |
Touch Dry @20°C |
3-4 hours |
Recoating Time @20°C |
Minimum 24 hours |
Typical Wet-Film Thickness |
105-170μm per coat |
Typical Dry-Film Thickness |
60-95μm per coat |
Solids by Volume |
58% (ASTM D2697) ±3%, dependent on colour |
VOC Information |
420g per litre (from formula to satisfy EU Solvent Emissions Directive) |
Application Temperature |
10-35°C |
Application Method |
Brush or roller |
Substrates |
Suitably cleaned and dry surfaces |
Thinners |
Thinning not recommended. For cleaning, use standard thinners. |
Flash Point |
>25°C |
Pack Size |
5 litre can; 20 litre can; 205 litre barrel |
Shelf Life |
12 months |
Anti Slip Concrete Floor Paint – Product Description & Recommended Use
- A single-pack, quick-drying floor-coating providing good durability and impact resistance
- Moderate protection against solvents, salt and water-damage
- In high-risk areas, which may be prone to pedestrian slippage, the anti slip properties of this floor paint meet most foot traffic requirements
- Suitable for medium-duty commercial and industrial areas
- Easy to apply by roller and brush and easy to repaint on high wear areas
- If you need more of an aggregated surface, please see our pumice and SuperTough iron-silicate additives
- – Coverage: 5-10 m² per litre
– Touch Drying Time: 3-6 hours
– Recoat: 24 hours
– Hard Drying Time: 48 hours
Do you need help with slip resistant paint?
Please don’t hesitate to call us on 01782 550733, email sales@regalpaint.co.uk or click on the ‘enquire about this product’. We are happy to provide as much customer service as you need.
| Weight | N/A |
|---|---|
| Select Colour | Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Slate Grey, Light Grey, Black, White |
| Select Size | 5 Litres, 20 Litres |
WE AIM TO DISPATCH ORDERS RECEIVED PRE-NOON ON THE SAME DAY (STOCK DEPENDENT)
ALL ORDERS SENT ON A NEXT WORKING-DAY SERVICE
FREE DELIVERY ON ALL ORDERS OVER £300*
*£300 NET. Excludes surcharge areas - delivery surcharge will still apply.
Related products
£42.00–£120.00 ex. VAT
£50.40–£144.00 incl. VAT
£50.40–£144.00 incl. VAT
Aluminium Quick Dry Enamel with a tough, quick drying finish. A metal paint made with high grade aluminium flake, rather than pigment, which is dissolved in solvent for 24 hours and diluted with urethan alkyd. Heat resistant up to 150 degrees C. Steel-grey in finish. Typically used to refurbish truck wheels. Advisable to spray. Never use a roller with this product.
£44.00–£122.50 ex. VAT
£52.80–£147.00 incl. VAT
£52.80–£147.00 incl. VAT
Two-Pack Epoxy Metal Primer - Designed for a wide range of metal substrates, our two pack epoxy primer offers excellent durability and resistance to contact with solvents, acids, alkalis and salts. It’s hardwearing surface gives good protection against corrosion due to it’s phosphate content. Two-Pack Epoxy Metal Primer is suitable for galvanised steel and aluminium. - Coverage: 5-10 m² per litre - Touch Drying Time: 12 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
£7.00–£21.50 ex. VAT
£8.40–£25.80 incl. VAT
£8.40–£25.80 incl. VAT
SuperTough Aggregate is an iron-silicate grit. With much larger particles than our Pumice Aggregate, it has a hard, sharp finish to give fantastic grip when used in conjunction with our floor paints. To use SuperTough Aggregate, firstly apply a coat of floor paint and then liberally scatter the grit over the surface of the wet paint. Allow the floor to dry for a full 24 hours. Once dry, use a soft brush to remove the excess SuperTough Aggregate that hasn’t stuck. Then paint over the whole surface of the floor again to seal the grit in place on the floor.
£36.00–£93.50 ex. VAT
£43.20–£112.20 incl. VAT
£43.20–£112.20 incl. VAT
One Coat High Build Steel Enamel - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This protects against corrosion and impacts. - Coverage: 5-10 m2 per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
£6.00–£18.50 ex. VAT
£7.20–£22.20 incl. VAT
£7.20–£22.20 incl. VAT
Pumice aggregate is an extremely lightweight natural material which is mixed into the paint prior to application. It gives a rough-profiled finish and significantly increases slip resistance. When using, pour the pumice into the paint and mix thoroughly. After mixing, use the paint immediately. Apply the paint with a roller to achieve a consistent finish. A natural stone alternative to plastic microbeads.
£48.50 ex. VAT
£58.20 incl. VAT
£58.20 incl. VAT
A new addition to our range of exterior masonry paint colours. Regal Slate Grey Masonry Paint is a water borne (water based) masonry paint with a smooth sheen finish. Based on acrylic resin. Excellent covering power and opacity. We add plenty of biocides to give long lasting protection to exterior walls, guarding against weather damage. Can also be used to paint internal brick and concrete walls of industrial units, commercial units, factories, garages etc. Competitively priced, this is a lovely dark grey masonry paint made in our factory in Stoke-on-Trent. Sold in 20 litre cans. Also available in white and magnolia. Bespoke colours can be made for orders over 200 litres. Please contact us for more details.
£36.00–£93.50 ex. VAT
£43.20–£112.20 incl. VAT
£43.20–£112.20 incl. VAT
Regal Skip and Container Paint - Made in our factory, this product is a tough, long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Using Skip and Container paint eliminates the need for two coats and cuts the drying time between coats, reducing labour and paint costs. Enhanced with calcium phosphate, with excellent anticorrosive properties, Regal Skip and Container Paint protects against corrosion and impacts.
£43.50–£121.50 ex. VAT
£52.20–£145.80 incl. VAT
£52.20–£145.80 incl. VAT
Milking Parlour Wall Paint - Designed for it’s resistance to moisture and industrial pollution, and is also extremely resistant to chemicals, acids and alkaline. Parlour paint is ideal for areas kept hygienically clean by jet washing and detergents. This is based on a chlorinated rubber, halogenated hydrocarbon resin, giving a semi-gloss finish. - Coverage: 5m² per litre - Touch Drying Time: 6hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs
£34.50–£82.00 ex. VAT
£41.40–£98.40 incl. VAT
£41.40–£98.40 incl. VAT
Quick Drying Gloss Enamel - Enamel Paint - A tough, long lasting, fast drying metal paint with a gloss finish made on a high build alkyd. High impact resistance, compatible with most primers or as a single coat. Can be used for a variety of applications as diverse as machinery paint, skip paint, shipping container paint and tractor paint. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
£52.50–£158.50 ex. VAT
£63.00–£190.20 incl. VAT
£63.00–£190.20 incl. VAT
Two Pack High Build Epoxy Garage Floor Paint - Designed for application to concrete, cement and non ferrous metals. Excellent resistance to water, solvents, acids, alkalis and salts. Gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle / trucks). - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
£35.00–£93.00 ex. VAT
£42.00–£111.60 incl. VAT
£42.00–£111.60 incl. VAT
Plywood Paint / MDF Paint - A tough, long lasting, fast drying gloss finish made on a high build alkyd. High impact resistance, compatible with most primers or as a single coat. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
£40.00–£93.50 ex. VAT
£48.00–£112.20 incl. VAT
£48.00–£112.20 incl. VAT
Line Marking Paint - A quick drying floor paint used to mark out safe zones, work areas, walkways, hazard areas etc on your floor. A durable coating with good resistance to abrasion and impact along with with protection against solvent, salt and water damage. Ideally suited to factory floors, warehouses, service garages, car parks and other industrial areas where long lasting and clearly visible markings are required. Available in five colours.
£34.50–£78.00 ex. VAT
£41.40–£93.60 incl. VAT
£41.40–£93.60 incl. VAT
Agricultural Oxide - A long oil based protective metal coating, suitable for all types of interior/exterior substrates. It has excellent covering power and can be used on block work, steel sheets, asbestos sheeting as well as wood. It has a good gloss finish, gives protection against weathering and corrosion.
£32.50–£67.50 ex. VAT
£39.00–£81.00 incl. VAT
£39.00–£81.00 incl. VAT
Floor Primer made to use in conjunction with any of the Regal single pack topcoat floor paints. Not suitable for use with our epoxy topcoat floor paint. Regal Prime and Seal is a single pack, quick drying, low viscosity, penetrating first-coat floor primer. Designed to soak into the substrate, it enhances adhesion of subsequent top coats by acting as an anchor layer between the substrate and floor paint. Regal Prime and Seal dries with a flat finish. The colour is non specific. - Coverage: 5-10 m² per litre - Touch Drying Time: 2-4 hours - Recoat: 24 hours - Hard Drying Time: 24 hours You might be thinking does floor paint need primer? Please read our information page 'what does floor primer do?'.
£84.92–£87.12 ex. VAT
£101.90–£104.54 incl. VAT
£101.90–£104.54 incl. VAT
Single Garage Epoxy Floor Paint Bundle - This garage floor epoxy bundle has been designed for easy application to concrete garage floors and provides sufficient first coat and top coat epoxy paint to coat a standard single garage floor with a beautiful, hard-wearing finish (see diagram for dimensions). This bundle consists of: 1 x 5 Lts Two Pack Epoxy Sealer 1 x 5 Lts Two Pack Epoxy Floor Paint Topcoat (Select Colour)
£52.50–£158.50 ex. VAT
£63.00–£190.20 incl. VAT
£63.00–£190.20 incl. VAT
Two Pack Epoxy Floor Paint (Top Coat) - This epoxy floor coating is designed for application to concrete, cement and non ferrous metals. It provides excellent resistance to water, solvents, acids, alkalis and salts and gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days
