From £29.50 ex VAT - £35.40 inc VAT
Line Marking Paint – A single-pack quick dry high build floor paint which provides very good durability against abrasion and impact along with with protection against solvent, salt and water damage.
*Colours in the chart are approximate and may vary.
Post Office Red, JCB Yellow, Bright Orange, Black, White. *Other RAL and British Standard colours can be made, dependent on the quantities required.
Dry Film Appearance
5-8m2 per litre, dependent on film thickness (10m2 @ 50mμ; 5m2 @ 100μ)
Touch Dry @20°C
Recoating Time @20°C
Minimum 24 hours
Typical Wet-Film Thickness
85-135μm per coat
Typical Dry-Film Thickness
50-100μm per coat
Solids by Volume
58% (ASTM D2697) ±3%, dependent on colour
420g per litre (from formula to satisfy EU Solvent Emissions Directive)
Brush or roller
Suitably cleaned and dry surfaces
Thinning not recommended. For cleaning, use standard thinners.
5 litre can; 20 litre can; 205 litre barrel
Line Marking Paint – Product Description & Recommended Use
- A single-pack, quick-drying, high-build line marking paint providing good durability and impact resistance.
- Moderate protection against solvents, salt, water and cleaning chemicals.
- Available as a semi-gloss finish in a range of colours specially formulated to provide good aesthetics and safe use.
- This floor coating is suitable for medium-duty commercial and industrial areas.
- Easy to apply by roller and brush and easy to repaint on high-wear areas.
Our line marking paint is very easy to apply and available in a choice of four colours. It is ideally suited to car parks, factories and warehouses where it is essential that long lasting a clear markings remain in place. We are always happy to discuss your requirements and offer suggestions if needed, so please feel free to call Regal Paints and speak with our technical advisers about your requirements.
Line Marking Paint, as the name suggests, is a specially formulated paint usually for marking out and demarcation lines on flooring although it can and sometimes is also reused for pipe marking and other forms of marking. The chief characteristics of line marking paint are high opacity and fast return to service. There are a huge range of types of line marking paint available, everything from water-based line marking used for sports fields and tracks to carparks (which are generally solvent based or hot applied) to aerosol line markings for marking out temporary marking on asphalt or similar to line up building or construction work. Surprisingly there are even “blackout” line marking paints formulated for no bleed through to cover up previous marked lines prior to remarking with new lines. These are particularly common at venues with changing use like sports grounds and halls and car parks.
Line Marking Paint is a specifically formulated to achieve in a single pass a line of the specified colour and or texture in a single pass and return to service quickly. Historically Lien Marking Paint was hot applied and the white and yellow road marking paints are a common sight and often still applied using this old technology. However, modern Line Marking Paint is now often developed using what are known as thermoplastic acrylics or thermoplastic non-convertible coatings (for easier remarking) and the formulator has a wide range of technology to draw on depending on the end application and life expectancy. For solvent borne coatings as well as thermoplastic acrylics for more chemicals resistance or overcoatability hydrocarbon resins, chlorinated or acrylated rubbers can be used. Whilst for water based applications sometimes it is preferable to have a degradable coating (for example if marking out grass for a tennis court or football pitch) or high wearing high MMA coating chosen for its relatively high glass transition temperature (Tg) to stop it wearing off too quickly and to enable nonslip properties to be incorporated.
Good quality Line Marking Paint finish paints all have one thing in common, high opacity. This essential feature is dependent to a large extent on the choice and quality of the pigmentation used and titanium dioxide is the pigment of choice for most wearing white lines whereas for degradable coatings for grass for example usually have a higher loading natural pigmentation usually in the form of a calcined clay or calcium carbonate “treated” to scatter more light and so to appear whiter. White is by far the most popular colour for line marking although a limited range of colours are often offered to enable other markings to be shown (red yellow are popular although due to the EU regulation of hazardous chemicals known as REACH these can be prohibitively expensive now as the principal pigment used in the yellows has been withdrawn across most of Europe due to the lead and chromium requiring special testing of those workers producing the paint and the alternatives frequently are lower opacity so require higher pigment loading and hence much higher cost. Typically, a lead-free version of a yellow pigment can cost anything from 5 to10 times the price of the traditional yellow pigments used in the past for our “double yellow lines”. These lead chromate derivatives now generally replaced by these more expensive but safer bismuth vanadate. However, there is still a demand requirement for the older technology lead chromates despite pressure from the EU to remove them under what is known as a “sunset date” by which they have to be replaced.
The choice of resin system is much wider and depends to a large extent on the formulator and his experience with the specific end application. Good formulators generally know their systems well and Line Marking Paint failures are rare once applied in accordance with the manufacturer’s instructions and technical data sheet.
In conclusion, be very clear on the end use of your Line Marking Paint when asking your supplier, the right Line Marking Paint for your specific job or jobs may require more than one Line Marking Paint to give you the effect you require and it is usually false economy to try and use the wrong type of Line Marking Paint a little like trying to join two pieces of wood with a screw and a hammer-yes you can do it but may not be happy with the result so always be clear on the objective to get the right product for the right job – for example a solvent based thermoplastic acrylic makes great durable white line marking paint…. But if it is for the grass on your tennis court it is the wrong product.
Regal Paints® - Floor Paint ManufacturersRegal Paints® manufacture hard wearing, long lasting, high-performance floor paint for a complete range of applications, both industrial and commercial. Our floor paints are ideally suited for application on warehouse floors, factory floors, commercial garages, MOT centres, showrooms, chemical plants, galleries and much more. Regal Paints are specialist manufacturers of epoxy floor paint, concrete floor paint, quick-drying paint, garage floor paint and more. Please contact us to discuss your requirements or consult our floor coatings FAQ section for more information..
Post Office Red, JCB Yellow, Bright Orange, Black, White
5 Litres, 20 Litres
Polyurethane Concrete Floor Paint - A single pack high build floor coating giving medium durability against abrasion and impact, with limited protection against solvent, salt and water damage. Polyurethane Concrete Floor Paint is easy to apply with a gloss or semi-gloss finish. Suitable for light commercial and industrial areas.
One Coat Gloss Paint - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This one coat paint protects against corrosion and impacts.
Single Pack Foor Paint Bundle 5 Litres (25-50 Sq meters Coverage) - The single pack floor paint bundle is aimed at the light industrial and commercial market. The pack includes all the products you will need to go from a bare concrete floor to a dust free, clean , protected and visually appealing floor. the three products in the bundle are formulated to work together, cross linking to for a durable flooring system. Single pack floor paints whilst not as durable as two pack epoxies are extremely easy to apply and are consistently fast drying in all year round temperatures. 3 x 5lts product comprising: 1 x 5lts Regal Prime and Seal 1 x 5lts QUICK DRY HIGH BUILD FLOOR PAINT 1 x 5Lts Regal Clear Finish
Two Pack High Build Epoxy Garage Floor Paint - Designed for application to concrete, cement and non ferrous metals. Excellent resistance to water, solvents, acids, alkalis and salts. Gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
Exterior Wood Paint - Exterior Metal Paint - A long oil based decorative gloss finish designed for a wide range of substrates. Ideal for wooden windows/doors, metal fencing/garage doors or concrete walls. This has excellent covering power and provides long lasting weather protection. - Coverage: 5 - 10 m2 per litre - Touch Drying Time: 12hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs
Pumice aggregate is an extremely light aggregate which has the advantage of being able to mix into the paint prior to application. It is a non-microbead solution to a fine, aggregated finish. Pumice gives a rough-profiled finish and significantly increase slip resistance. When using, pour the pumice into the paint and mix thoroughly. After mixing, use the paint immediately. The paint must be applied with a roller to achieve a consistent finish.
Single Pack Foor Paint Bundle 3 x 20 Litres - The single pack floor paint bundle is aimed at the light industrial and commercial market. The pack includes all the products you will need to go from a bare concrete floor to a dust free, clean , protected and visually appealing floor. the three products in the bundle are formulated to work together, cross linking to for a durable flooring system. Single pack floor paints whilst not as durable as two pack epoxies are extremely easy to apply and are consistently fast drying in all year round temperatures. 3 x 20lts Product: 1x 20lts Regal Prime and Seal 1x 20lts QUICK DRY HIGH BUILD FLOOR PAINT 1x 20Lts Acrylic Based Regal Clear Finish (with Activator)
Anticorrosive Quick Dry Primer is a single pack priming solution suitable for most metal substrates. Also suitable for pre-treated aluminium and galvanised steel. Anticorrosive Quick Dry Primer gives excellent protection against corrosion. Excellent build levels and can be re-coated in most types of finish. - Coverage: 5 m² per litre - Touch Drying Time: 30 mins - 1 hr - Recoat: 12 hrs - Hard Drying Time: 24 hrs
SuperTough Aggregate is an iron-silicate grit. It has good shatter resistance and has a hard, sharp finish to give fantastic grip. To use SuperTough Aggregate on a previously-painted floor, apply a coat of floor paint and then liberally scatter the grit over the surface of the wet paint. Allow the floor to dry for a full 24 hours. Once dry, remove the excess SuperTough Aggregate that hasn’t stuck with a soft brush. Then the paint over the whole surface of the floor again to seal the grit in place on the floor.
High Build Phosphate Quick Dry Primer is a single pack priming solution suitable for most metal substrates. This metal paint is also suitable for pre-treated aluminium and galvanised steel. High Build Phosphate Quick Dry Primer gives excellent protection against corrosion. Excellent build levels and can be re-coated in most types of finish. - Coverage: 5 m² per litre - Touch Drying Time: 30 mins - 1 hr - Recoat: 12 hrs - Hard Drying Time: 24 hrs
Antislip Quick Dry Concrete Floor Paint - A single pack quick drying floor coating. Gives good durability and impact resistance. This gives protection against solvent, salt and water damage. Low slip properties due to fine flat aggregated finish. Antislip Quick Dry Concrete Floor Paint is suitable for heavy duty commercial and industrial areas. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 24 hours - Hard Drying Time: 48 hours
Two-Pack Epoxy Metal Primer - Designed for a wide range of metal substrates, our two pack epoxy primer offers excellent durability and resistance to contact with solvents, acids, alkalis and salts. It’s hardwearing surface gives good protection against corrosion due to it’s phosphate content. Two-Pack Epoxy Metal Primer is suitable for galvanised steel and aluminium. - Coverage: 5-10 m² per litre - Touch Drying Time: 12 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
Milking Parlour Wall Paint - Designed for it’s resistance to moisture and industrial pollution, and is also extremely resistant to chemicals, acids and alkaline. Parlour paint is ideal for areas kept hygienically clean by jet washing and detergents. This is based on a chlorinated rubber, halogenated hydrocarbon resin, giving a semi-gloss finish. - Coverage: 5m² per litre - Touch Drying Time: 6hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs
Masonry Paint - A water borne smooth sheen finish based on acrylic resin. Excellent covering power, with long lasting protection to all exterior substrates, guarding against weather damage. We are also able to make up batches of masonry paint to specific customer requirements. For information on the colours we supply for large and bespoke orders of 400 Litres or more, please contact us.
Quick Drying Gloss Enamel - Enamel Paint - A tough, long lasting, fast drying metal paint with a gloss finish made on a high build alkyd. High impact resistance, compatible with most primers or as a single coat. Can be used for a variety of applications as diverse as machinery paint, skip paint, shipping container paint and tractor paint. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
One Coat High Build Steel Enamel - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This protects against corrosion and impacts. - Coverage: 5-10 m2 per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours