
From £33.00 ex VAT - £39.60 inc VAT
Line Marking Paint – A single-pack quick dry high build floor paint which provides very good durability against abrasion and impact along with with protection against solvent, salt and water damage.

COLOURS




JCB Yellow

*Colours in the chart are approximate and may vary.
Standard Colours |
Post Office Red, JCB Yellow, Bright Orange, Black, White.
*Other RAL and British Standard colours can be made, dependent on the quantities required.
|
Dry Film Appearance |
Semi-gloss
|
Spreading Rate |
5-8m2 per litre, dependent on film thickness (10m2 @ 50mμ; 5m2 @ 100μ)
|
Touch Dry @20°C |
3-4 hours
|
Recoating Time @20°C |
Minimum 24 hours
|
Typical Wet-Film Thickness |
85-135μm per coat
|
Typical Dry-Film Thickness |
50-100μm per coat
|
Solids by Volume |
58% (ASTM D2697) ±3%, dependent on colour
|
VOC Information |
420g per litre (from formula to satisfy EU Solvent Emissions Directive)
|
Application Temperature |
10-35°C
|
Application Method |
Brush or roller
|
Substrates |
Suitably cleaned and dry surfaces
|
Thinners |
Thinning not recommended. For cleaning, use standard thinners.
|
Flash Point |
>25°C
|
Pack Size |
5 litre can; 20 litre can; 205 litre barrel
|
Shelf Life |
12 months
|
Line Marking Paint – Product Description & Recommended Use
- A single-pack, quick-drying, high-build line marking paint providing good durability and impact resistance.
- Moderate protection against solvents, salt, water and cleaning chemicals.
- Available as a semi-gloss finish in a range of colours specially formulated to provide good aesthetics and safe use.
- This floor coating is suitable for medium-duty commercial and industrial areas.
- Easy to apply by roller and brush and easy to repaint on high-wear areas.
Our line marking paint is very easy to apply and available in a choice of four colours. It is ideally suited to car parks, factories and warehouses where it is essential that long lasting a clear markings remain in place. We are always happy to discuss your requirements and offer suggestions if needed, so please feel free to call Regal Paints and speak with our technical advisers about your requirements.
Line Marking Paint, as the name suggests, is a specially formulated paint usually for marking out and demarcation lines on flooring although it can and sometimes is also reused for pipe marking and other forms of marking. The chief characteristics of line marking paint are high opacity and fast return to service. There are a huge range of types of line marking paint available, everything from water-based line marking used for sports fields and tracks to carparks (which are generally solvent based or hot applied) to aerosol line markings for marking out temporary marking on asphalt or similar to line up building or construction work. Surprisingly there are even “blackout” line marking paints formulated for no bleed through to cover up previous marked lines prior to remarking with new lines. These are particularly common at venues with changing use like sports grounds and halls and car parks.
Line Marking Paint is a specifically formulated to achieve in a single pass a line of the specified colour and or texture in a single pass and return to service quickly. Historically Lien Marking Paint was hot applied and the white and yellow road marking paints are a common sight and often still applied using this old technology. However, modern Line Marking Paint is now often developed using what are known as thermoplastic acrylics or thermoplastic non-convertible coatings (for easier remarking) and the formulator has a wide range of technology to draw on depending on the end application and life expectancy. For solvent borne coatings as well as thermoplastic acrylics for more chemicals resistance or overcoatability hydrocarbon resins, chlorinated or acrylated rubbers can be used. Whilst for water based applications sometimes it is preferable to have a degradable coating (for example if marking out grass for a tennis court or football pitch) or high wearing high MMA coating chosen for its relatively high glass transition temperature (Tg) to stop it wearing off too quickly and to enable nonslip properties to be incorporated.
Good quality Line Marking Paint finish paints all have one thing in common, high opacity. This essential feature is dependent to a large extent on the choice and quality of the pigmentation used and titanium dioxide is the pigment of choice for most wearing white lines whereas for degradable coatings for grass for example usually have a higher loading natural pigmentation usually in the form of a calcined clay or calcium carbonate “treated” to scatter more light and so to appear whiter. White is by far the most popular colour for line marking although a limited range of colours are often offered to enable other markings to be shown (red yellow are popular although due to the EU regulation of hazardous chemicals known as REACH these can be prohibitively expensive now as the principal pigment used in the yellows has been withdrawn across most of Europe due to the lead and chromium requiring special testing of those workers producing the paint and the alternatives frequently are lower opacity so require higher pigment loading and hence much higher cost. Typically, a lead-free version of a yellow pigment can cost anything from 5 to10 times the price of the traditional yellow pigments used in the past for our “double yellow lines”. These lead chromate derivatives now generally replaced by these more expensive but safer bismuth vanadate. However, there is still a demand requirement for the older technology lead chromates despite pressure from the EU to remove them under what is known as a “sunset date” by which they have to be replaced.
The choice of resin system is much wider and depends to a large extent on the formulator and his experience with the specific end application. Good formulators generally know their systems well and Line Marking Paint failures are rare once applied in accordance with the manufacturer’s instructions and technical data sheet.
In conclusion, be very clear on the end use of your Line Marking Paint when asking your supplier, the right Line Marking Paint for your specific job or jobs may require more than one Line Marking Paint to give you the effect you require and it is usually false economy to try and use the wrong type of Line Marking Paint a little like trying to join two pieces of wood with a screw and a hammer-yes you can do it but may not be happy with the result so always be clear on the objective to get the right product for the right job – for example a solvent based thermoplastic acrylic makes great durable white line marking paint…. But if it is for the grass on your tennis court it is the wrong product.
Regal Paint® - Floor Paint Manufacturers
Regal Paint® manufactures hard wearing, long lasting, high-performance floor paint for a complete range of applications, both industrial and commercial. Our floor paints are ideally suited for application on warehouse floors, factory floors, commercial garages, MOT centres, showrooms, chemical plants, galleries and much more. Regal Paints are specialist manufacturers of epoxy floor paint, concrete floor paint, quick-drying paint, garage floor paint and more. Please contact us to discuss your requirements or consult our floor coatings FAQ section for more information..

Weight | N/A |
---|---|
Select Colour | Post Office Red, JCB Yellow, Bright Orange, Black, White |
Select Size | 5 Litres, 20 Litres |
Related products
Quick Dry High Build Floor Paint - A single pack quick dry floor coating which provides good durability against abrasion and impact along with with protection against solvent, salt and water damage. Very easy to apply. Suitable for heavy duty commercial and industrial areas.
Two Pack High Build Epoxy Garage Floor Paint - Designed for application to concrete, cement and non ferrous metals. Excellent resistance to water, solvents, acids, alkalis and salts. Gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
Single Pack Foor Paint Bundle 3 x 20 Litres - The single pack floor paint bundle is aimed at the light industrial and commercial market. The pack includes all the products you will need to go from a bare concrete floor to a dust free, clean , protected and visually appealing floor. the three products in the bundle are formulated to work together, cross linking to for a durable flooring system. Single pack floor paints whilst not as durable as two pack epoxies are extremely easy to apply and are consistently fast drying in all year round temperatures. 3 x 20lts Product: 1x 20lts Regal Prime and Seal 1x 20lts QUICK DRY HIGH BUILD FLOOR PAINT 1x 20Lts Acrylic Based Regal Clear Finish (with Activator)
Agricultural Oxide - A long oil based protective metal coating, suitable for all types of interior/exterior substrates. It has excellent covering power and can be used on block work, steel sheets, asbestos sheeting as well as wood. It has a good gloss finish, gives protection against weathering and corrosion.
Regal Clear Finish is a high solids, medium viscosity, Fast physical drying coating. Displaying Very good adhesion , Very good abrasion resistance., Very good alkali and humidity resistance and Excellent hardness.It's tough, hard wearing Acrylic copolymer is blended with a xylene based solvent.
Two Pack Epoxy Floor Paint (Top Coat) - This epoxy floor coating is designed for application to concrete, cement and non ferrous metals. It provides excellent resistance to water, solvents, acids, alkalis and salts and gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days
Milking Parlour Wall Paint - Designed for it’s resistance to moisture and industrial pollution, and is also extremely resistant to chemicals, acids and alkaline. Parlour paint is ideal for areas kept hygienically clean by jet washing and detergents. This is based on a chlorinated rubber, halogenated hydrocarbon resin, giving a semi-gloss finish. - Coverage: 5m² per litre - Touch Drying Time: 6hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs
Regal Prime & Seal is a single pack quick dry low viscosity penetrating first coat primer. It's designed to soak into the substrate, providing excellent adhesion of subsequent top coats. Using Regal Prime & Seal will reduce any risk off delamination due to poor penetration of heavy top coats. The sealer anchors the topcoats into the floor. Regal Prime & Seal dries with a flat finish and is opaque in colour. - Coverage: 5-10 m² per litre - Touch Drying Time: 2-4 hours - Recoat: 24 hours - Hard Drying Time: 24 hours
Polyurethane Concrete Floor Paint - A single pack high build floor coating giving medium durability against abrasion and impact, with limited protection against solvent, salt and water damage. Polyurethane Concrete Floor Paint is easy to apply with a gloss or semi-gloss finish. Suitable for light commercial and industrial areas.
Two Pack Epoxy Floor Paint Bundle 5 Litres (25-50 sq meters coverage) - The two pack epoxy floor bundle is designed for heavy use commercial industrial areas or on flooring areas that require a low maintenance long lasting finish. The key advantages over a single pack product are greater resistance to impact and abrasion, also a much greater protection from chemical, acid and alkalis spills. A single pack floor paint may require annual maintenance to ensure high wear points don't erode however epoxy coat should last for a number of years. 3 x 5lts Product: 1x 5 lts TWO PACK EPOXY FLOOR SEALER (UNDERCOAT COAT) 1x 5lts TWO PACK EPOXY FLOOR PAINT (TOP COAT) 1x 5Lts Regal Clear Finish
Quick Dry Garage Floor Paint - A single pack quick dry floor coating, giving good durability against abrasion and impact with protection against solvent, salt and water damage. Quick Dry Garage Floor Paint is easy to apply with a choice of finishes i.e. gloss/semi/matt. Suitable for heavy duty commercial and industrial areas.
Two-Pack Epoxy Floor Sealer (Under Coat) - This epoxy floor paint (first coat) is designed to prepare the surface of concrete, cement and non ferrous metals. This gives an ideal base for epoxy topcoat or acts as a seal coat for bare concrete floors. Resistant to water, solvents, acids, alkalis and salts. Tough finish, and has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
Two-Pack Epoxy Metal Primer - Designed for a wide range of metal substrates, our two pack epoxy primer offers excellent durability and resistance to contact with solvents, acids, alkalis and salts. It’s hardwearing surface gives good protection against corrosion due to it’s phosphate content. Two-Pack Epoxy Metal Primer is suitable for galvanised steel and aluminium. - Coverage: 5-10 m² per litre - Touch Drying Time: 12 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
Antislip Quick Dry Concrete Floor Paint - A single pack quick drying floor coating. Gives good durability and impact resistance. This gives protection against solvent, salt and water damage. Low slip properties due to fine flat aggregated finish. Antislip Quick Dry Concrete Floor Paint is suitable for heavy duty commercial and industrial areas. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 24 hours - Hard Drying Time: 48 hours
SuperTough Aggregate is an iron-silicate grit. It has good shatter resistance and has a hard, sharp finish to give fantastic grip. To use SuperTough Aggregate on a previously-painted floor, apply a coat of floor paint and then liberally scatter the grit over the surface of the wet paint. Allow the floor to dry for a full 24 hours. Once dry, remove the excess SuperTough Aggregate that hasn’t stuck with a soft brush. Then the paint over the whole surface of the floor again to seal the grit in place on the floor.
Skip and Container paint - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Using Skip and Container paint eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This protects against corrosion and impacts.