Premier GT Showroom Floor Paint

Premier GT’s project was to refurb the main show room area.

Due to the nature of the product being exhibited in this show room the finish must be cosmetically appealing and hard wearing.

Premier GT

Client: Premier GT
Size of Floor Area: 3000 m2

STEP 1: FLOOR PREPARATION

Garage Floor Preparation

Product Chosen: Regal Clean ‘N Etch

Regal Clean n Etch ensures the top surface of the concrete is clean and free of latents and porous enough to ensure penetration for the first coat of paint.

£17.50 ex VAT

Clean n Etch 5L - This product is made for very smooth / power floated floors or dirty floors. Clean N Etch is a highly concentrated blend of non-fuming acidic compounds and cleaning agents, specifically developed to prepare concrete floors prior to applying paints and other protective coatings.

STEP 3: UNDERCOAT

Under Coat

Product Chosen: Two pack epoxy floor sealer (undercoat)

Regal TWO PACK EPOXY FLOOR SEALER (UNDERCOAT COAT) is designed to soak into bare concrete and provide a penetration coat to anchor all subsequent coats down into the floor.

From £32.50 ex VAT - £39.00 inc VAT

Two-Pack Epoxy Floor Sealer (Under Coat) - Designed for application to concrete, cement and non ferrous metals. This gives an ideal base for epoxy topcoat or acts as a seal coat for bare concrete floors. Resistant to water, solvents, acids, alkalis and salts. Tough finish, and has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days

STEP 3: TOP COAT

Top Coat

Product Chosen: Two pack Epoxy Floor Paint (Top Coat)

Regal TWO PACK EPOXY FLOOR SEALER (UNDERCOAT COAT) is designed to soak into bare concrete and provide a penetration coat to anchor all subsequent coats down into the floor.

From £38.50 ex VAT - £46.20 inc VAT

Two Pack Epoxy Floor Paint (Top Coat) - Designed for application to concrete, cement and non ferrous metals. Excellent resistance to water, solvents, acids, alkalis and salts. Gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days

Service Rating

“We went for these products as we wanted to achieve a high end finish to frame our luxury cars.”
The project went without a hitch and was easy to apply.

Product Rating

“We’ve been left with a gallery type environment in the showroom which helps the cars standout and maximise their looks.”
We would definitely use this combination of floor paints again.