Quick Dry High Build Floor Paint
£34.50–£87.00 ex. VAT
£41.40–£104.40 incl. VAT
Quick Dry High Build Floor Paint – A single pack quick dry floor coating which provides good durability against abrasion and impact along with with protection against solvent, salt and water damage. Very easy to apply. Suitable for heavy duty commercial and industrial areas.
BULK ORDERS? CALL 01782 550733 FOR DISCOUNTS!
PRODUCT NAME
Quick Dry High Build Floor Paint
PRODUCT DATA SHEET
SAFETY DATA SHEET
Technical Overview
Standard Colours |
Slate Grey, Light Grey, Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Black, White. *Other RAL and British Standard colours can be made, dependent on the quantities required. |
Dry Film Appearance |
Semi-gloss (60-70%) |
Spreading Rate |
5-8m2 per litre, dependent on film thickness (10m2 @ 50mμ; 5m2 @ 100μ) |
Touch Dry @20°C |
3-4 hours |
Recoating Time @20°C |
Minimum 24 hours |
Typical Wet-Film Thickness |
105-195μm per coat |
Typical Dry-Film Thickness |
85-110μm per coat |
Solids by Volume |
60% (ASTM D2697) ±3%, dependent on colour |
VOC Information |
420g per litre (from formula to satisfy EU Solvent Emissions Directive) |
Application Temperature |
0-35°C |
Application Method |
Brush or roller |
Substrates |
Suitably cleaned and dry surfaces |
Thinners |
Thinning not recommended. For cleaning, use standard thinners. |
Flash Point |
>25°C |
Pack Size |
5 litre can; 20 litre can; 205 litre barrel |
Shelf Life |
12 months |
Quick Dry High Build Floor Paint – Product Description & Recommended Use
- A single-pack, quick-drying, high-build floor-coating providing good durability and impact resistance.
- Moderate protection against solvents, salt, water and cleaning chemicals.
- Available as a semi-gloss finish in a range of colours specially formulated to provide good aesthetics and safe use.
- Suitable for medium-duty commercial and industrial areas.
- This floor paint is easy to apply by roller and brush and easy to repaint on high-wear areas.
Regal Paint® - Floor Paint Manufacturers
Regal Paint® manufactures hard wearing, long lasting, high-performance floor paint for a complete range of applications, both industrial and commercial. Our floor paints are ideally suited for application on warehouse floors, factory floors, commercial garages, MOT centres, showrooms, chemical plants, galleries and much more. Regal Paints are specialist manufacturers of epoxy floor paint, concrete floor paint, quick-drying paint, garage floor paint and more. Please contact us to discuss your requirements or consult our floor coatings FAQ section for more information..
| Weight | N/A |
|---|---|
| Select Colour | Brunswick Green, Ford Tractor Blue, Cornflower Blue, Red Oxide, Post Office Red, Caterpillar Yellow, JCB Yellow, Chocolate Brown, Bright Orange, Slate Grey, Light Grey, Black, White |
| Select Size | 5 Litres, 20 Litres |
WE AIM TO DISPATCH ORDERS RECEIVED PRE-NOON ON THE SAME DAY (STOCK DEPENDENT)
ALL ORDERS SENT ON A NEXT WORKING-DAY SERVICE
FREE DELIVERY ON ALL ORDERS OVER £300*
*£300 NET. Excludes surcharge areas - delivery surcharge will still apply.
Related products
£32.50–£67.50 ex. VAT
£39.00–£81.00 incl. VAT
£39.00–£81.00 incl. VAT
Floor Primer made to use in conjunction with any of the Regal single pack topcoat floor paints. Not suitable for use with our epoxy topcoat floor paint. Regal Prime and Seal is a single pack, quick drying, low viscosity, penetrating first-coat floor primer. Designed to soak into the substrate, it enhances adhesion of subsequent top coats by acting as an anchor layer between the substrate and floor paint. Regal Prime and Seal dries with a flat finish. The colour is non specific. - Coverage: 5-10 m² per litre - Touch Drying Time: 2-4 hours - Recoat: 24 hours - Hard Drying Time: 24 hours You might be thinking does floor paint need primer? Please read our information page 'what does floor primer do?'.
£44.00–£122.50 ex. VAT
£52.80–£147.00 incl. VAT
£52.80–£147.00 incl. VAT
Two-Pack Epoxy Floor Sealer (Under Coat) - This epoxy floor paint (first coat) is designed to prepare the surface of concrete, cement and non ferrous metals. This gives an ideal base for epoxy topcoat or acts as a seal coat for bare concrete floors. Resistant to water, solvents, acids, alkalis and salts. Tough finish, and has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
£36.00–£93.50 ex. VAT
£43.20–£112.20 incl. VAT
£43.20–£112.20 incl. VAT
One Coat Gloss Paint - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This one coat paint protects against corrosion and impacts.
£52.50–£158.50 ex. VAT
£63.00–£190.20 incl. VAT
£63.00–£190.20 incl. VAT
A two-Pack (or two-part) epoxy paint for metal, a topcoat enamel which is designed to be used in conjunction with Regal epoxy primer for application to most metal substrates. This epoxy metal paint has excellent durability and impact resistance. Offers protection from solvents, acids, alkalis and salts. - Coverage: 5-10 m² per litre - Touch Drying Time: 12 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days
£7.00–£21.50 ex. VAT
£8.40–£25.80 incl. VAT
£8.40–£25.80 incl. VAT
SuperTough Aggregate is an iron-silicate grit. With much larger particles than our Pumice Aggregate, it has a hard, sharp finish to give fantastic grip when used in conjunction with our floor paints. To use SuperTough Aggregate, firstly apply a coat of floor paint and then liberally scatter the grit over the surface of the wet paint. Allow the floor to dry for a full 24 hours. Once dry, use a soft brush to remove the excess SuperTough Aggregate that hasn’t stuck. Then paint over the whole surface of the floor again to seal the grit in place on the floor.
£42.00–£120.00 ex. VAT
£50.40–£144.00 incl. VAT
£50.40–£144.00 incl. VAT
Aluminium Quick Dry Enamel with a tough, quick drying finish. A metal paint made with high grade aluminium flake, rather than pigment, which is dissolved in solvent for 24 hours and diluted with urethan alkyd. Heat resistant up to 150 degrees C. Steel-grey in finish. Typically used to refurbish truck wheels. Advisable to spray. Never use a roller with this product.
£35.00–£93.00 ex. VAT
£42.00–£111.60 incl. VAT
£42.00–£111.60 incl. VAT
Plywood Paint / MDF Paint - A tough, long lasting, fast drying gloss finish made on a high build alkyd. High impact resistance, compatible with most primers or as a single coat. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
£169.84–£174.24 ex. VAT
£203.81–£209.09 incl. VAT
£203.81–£209.09 incl. VAT
Double Garage Two Pack Garage Floor Paint Bundle - This epoxy floor paint bundle is designed for application to concrete garage floors and provides enough paint to coat a standard double garage floor (see diagram for dimensions). This bundle consists of: 2 x 5 Lts Two pack Epoxy Floor Sealer 2 x 5 Lts Two Pack Epoxy Floor Paint Topcoat (Select Colour)
£48.50 ex. VAT
£58.20 incl. VAT
£58.20 incl. VAT
Our White Masonry Paint is a water borne (water based) masonry paint with a smooth sheen finish. Based on acrylic resin. Excellent covering power with long lasting protection to exterior walls, guarding against weather damage. Can also be used to paint internal brick and concrete walls of industrial units, factories etc. Sold in 20 litre cans and also available in Magnolia. Bespoke colours can be made for orders over 200 litres. Please contact us for more details.
£48.50 ex. VAT
£58.20 incl. VAT
£58.20 incl. VAT
A new addition to our range of exterior masonry paint colours. Regal Slate Grey Masonry Paint is a water borne (water based) masonry paint with a smooth sheen finish. Based on acrylic resin. Excellent covering power and opacity. We add plenty of biocides to give long lasting protection to exterior walls, guarding against weather damage. Can also be used to paint internal brick and concrete walls of industrial units, commercial units, factories, garages etc. Competitively priced, this is a lovely dark grey masonry paint made in our factory in Stoke-on-Trent. Sold in 20 litre cans. Also available in white and magnolia. Bespoke colours can be made for orders over 200 litres. Please contact us for more details.
£6.00–£18.50 ex. VAT
£7.20–£22.20 incl. VAT
£7.20–£22.20 incl. VAT
Pumice aggregate is an extremely lightweight natural material which is mixed into the paint prior to application. It gives a rough-profiled finish and significantly increases slip resistance. When using, pour the pumice into the paint and mix thoroughly. After mixing, use the paint immediately. Apply the paint with a roller to achieve a consistent finish. A natural stone alternative to plastic microbeads.
£121.88–£179.38 ex. VAT
£146.26–£215.26 incl. VAT
£146.26–£215.26 incl. VAT
Two Pack Epoxy Floor Paint Bundle 5 Litres - The two pack epoxy floor bundle is designed for heavy use commercial industrial areas or on flooring areas that require a low maintenance long lasting finish. The key advantages over a single pack product are greater resistance to impact and abrasion, also a much greater protection from chemical, acid and alkalis spills. A single pack floor paint may require annual maintenance to ensure high wear points don't erode however epoxy coatings should last for a number of years. Bundle includes 3 x 5 litre products: 1 x 5 lts two pack epoxy floor sealer 1 x 5 lts two pack epoxy floor paint top coat 1 x 5 lts Regal Clear Finish
£34.50–£82.00 ex. VAT
£41.40–£98.40 incl. VAT
£41.40–£98.40 incl. VAT
Quick Drying Gloss Enamel - Enamel Paint - A tough, long lasting, fast drying metal paint with a gloss finish made on a high build alkyd. High impact resistance, compatible with most primers or as a single coat. Can be used for a variety of applications as diverse as machinery paint, skip paint, shipping container paint and tractor paint. - Coverage: 5-10 m² per litre - Touch Drying Time: 3-6 hours - Recoat: 16 hours - Hard Drying Time: 48 hours
£30.50–£74.50 ex. VAT
£36.60–£89.40 incl. VAT
£36.60–£89.40 incl. VAT
Exterior Wood Paint - Exterior Metal Paint - A long oil based decorative gloss finish designed for a wide range of substrates. Ideal for wooden windows/doors, metal fencing/garage doors or concrete walls. This has excellent covering power and provides long lasting weather protection. - Coverage: 5 - 10 m2 per litre - Touch Drying Time: 12hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs
£34.50–£72.50 ex. VAT
£41.40–£87.00 incl. VAT
£41.40–£87.00 incl. VAT
Anticorrosive High Build Phosphate Quick Dry Primer is a single pack priming solution suitable for most metal substrates. This metal paint is also suitable for pre-treated aluminium and galvanised steel. High Build Phosphate Quick Dry Primer gives excellent protection against corrosion. Excellent build levels and can be re-coated in most types of finish. - Coverage: 5 m² per litre - Touch Drying Time: 30 mins - 1 hr - Recoat: 12 hrs - Hard Drying Time: 24 hrs
£43.50–£121.50 ex. VAT
£52.20–£145.80 incl. VAT
£52.20–£145.80 incl. VAT
Milking Parlour Wall Paint - Designed for it’s resistance to moisture and industrial pollution, and is also extremely resistant to chemicals, acids and alkaline. Parlour paint is ideal for areas kept hygienically clean by jet washing and detergents. This is based on a chlorinated rubber, halogenated hydrocarbon resin, giving a semi-gloss finish. - Coverage: 5m² per litre - Touch Drying Time: 6hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs
